THIS IS ANOTHER TEAM GRAND WAGONEER EXCLUSIVE ITEM.
This Is A Rear Tail Light Lens Gasket Specifically Designed & Made For By Team Grand Wagoneer To Fit All Jeep Wagoneers From 1963-1982 & Some 1983 Models.
This TGW Brand Tail Light Gasket Is Made Of A Foam & Rubber Blend Exactly Like The Factory Original & Is Made Right Here In The U.S.A. Exclusively For Team Grand Wagoneer.
Jeep Has Discontinued These Gaskets Over 10-Years Now & Finally TGW Has Come Out With A Gasket For Your Tail Lamps.
This Tail Light Gasket Fits Tail Light Lens Part Numbers # J5459551 & # J5459552.
We Also Sell Tail Light #J5459552 On This Web Site, However The Drivers Rear Light Part# J5459551 Is No Longer Available Anywhere Which Makes These Gaskets More Crucial.
This Gasket Will Fit Both The Driver & Passenger Rear Tail Light Lens & Fits Inside The Groove Of The Lens Itself Making For A Tight & Proper Seal.
Over Time, These Gaskets Tend To Dry Out & Crack Causing A Poor Seal Allowing Moisture & Water To Get Inside.
This Then Causes The Lamp To Become Dirty Inside Making It For Poor Lighting & Worse Yet, It Can Cause Bulb Sockets To Corrode & Burn Out The Bulbs & More So Stop Working Altogether.
Keeping A Tight & Proper Seal Will Ensure Longer Bulb Life & Prevent Your Sockets From Corroding While Keeping Your Lamps Clean & Newer Looking.
This Gasket Should Be Replaced The Next Time You Change A Tail Lamp Bulb As The Seals On Your Jeep Are At Least 10-50 Years Old & Most Likely Could Use Replacement.
WE WILL BE SELLING THESE TAIL LIGHT LENS GASKETS AS EACH BUT SAVE AN EXCEPTIONAL AMOUNT WHEN REPLACING THESE AS A PAIR.
When You Need A Hard To Find Part For Your Grand Wagoneer & Or Full Size Jeep, Turn To The Full Size Jeep & Grand Wagoneer Head Quarters & Shop Here At Team Grand Wagoneer!
REPLACES FACTORY ORIGINAL TAIL LIGHT LENS GASKET PART# J0931642, J0932159
TGW REAR TAIL LIGHT LENS GASKET PART# TGWJ0931642
3 Reviews Hide Reviews Show Reviews
No idea where else you can get these anyway ! worked great!
This gasket is nearly perfect. Relatively inexpensive, good fit, easy application. It is exactly what I needed and has resolved my leaky lens blowing bulbs in the rain.
The only reason I am not giving this item a 5 star review, however, is because after I opened the packaging and prepared to install the gasket, I discovered there was no adhesive backing. This wasn't a big deal, but I did have to go to the hardware store and pick up some mild spray adhesive so that the gasket would stay in place inside the enclosure. Therefore, 4 stars. Nearly perfect. A peel-off sticker-style application would get 5.
Ordered these for a 1965 Jeep Waggoneer and they fit perfectly. I used a small bead of weatherstripping adhesive to put them on. Be careful not to stretch them when you install them. The 4 screw hole cut outs lined up perfectly with the screw holes and the lens cover fit right back on with no issues.