Jeep XJ, Jeep Cherokee, Jeep Comanche and Jeep Wagoneer Fuel System Parts
 |
||||
|
Browse through our selection of Jeep XJ, Jeep Cherokee, Jeep Commanche and Jeep Wagoneer parts.
If you need a part but don't see it here, e-mail us at parts@teamcherokee.com and we'll do our best to locate it for you. Or if you prefer, call us at (262) 658-2268. Order safely and securely: Clicking on the purchase button for any of the parts below will take you to our secure online ordering system. All prices below are quoted in U.S. dollars. Shipping charges are additional. 30-day warranty on parts: Parts must be returned in original package and are subject to a 20% restocking fee. No returns on electrical items. Customer must pay for return shipping. |
|
||
|
||||
|
Pages: [<<] 1 2 3 [>>] | |
||
|
|
Click here for larger image
|
|
Featured Item: Fuel Pump Module & Sending Unit Seal Cherokee 1994-2001 This Is A Direct Replacement OE Style Fuel Tank Pump Module & Sending Unit Seal. This Fuel Pump Module Seal Is Correct & Will Fit All Jeep Cherokees From 1994-2001. If You Are Smelling A Gasoline Leak From The Gas Tank Area But You Do Not See Any Leaks At All-But Smell The Leak Near The Top Of The Gas Tank-This Is Most Likely The Problem. If Your Fuel Pump & Fuel Sending Unit Are Working Or If You Are Replacing Those Items-& You Suspect Even A Small Gas Leak-It Is Best To Remove The Seal & Replace It At That Time. At This Point You Can Tighten The Fuel Pump Module In Case That Is Loose & Make Sure The New Seal Is In. We Are Selling This Fuel Pump Module Seal For About Half The Dealer Price For The Same Quality & You Get The Same 12-Month Warranty Through Crown Auto. OE REPLACEMENT PART#52018808 CROWN PART#52018808 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Pump Module Assembly NOS-OEM Cherokee 1996 This Is A Brand New Factory Original-New Old Stock Item That Has Been Sitting On A Shelf For A Long Time & Specifically Will Fit The 1996 Jeep Cherokee Only. This Will Not Work With The Diesel Engine But Will Work For Both The 2.5 & 4.0 Liter Gas Engines In 1996. These Are Complete Fuel Pump Module Assemblies All Put Together With The Fuel Sending Unit & Fuel Pressure Regulator & Sock Filter All Attached. These Have Long Been Discontinued & These Will Go Fast. If You Have Problems Where Your Engine Just Dies Out At Highway Speeds For No Reason & You Need To Wait 30-Minutes To Get It Back Started-Then This May Be The Problem. If Your Fuel Gauge Is Stuck On Empty Or Full-You May Need This Fuel Pump Module As Well. PLEASE NOTE-Since These Pump Modules Have Been Sitting For A While-There May Be Some Oxidation On Your Pump. They Will Still Be Absolutely Fine & There Are Absolutely Brand New. JEEP WAS SELLING THIS SAME EXACT PART FOR OVER $775.00 LIST PRICE WHEN THEY WERE AVAILABLE. WE ONLY HAVE A 2-3 LEFT OR SO LEFT SO GET THIS NOW WHILE YOU CAN. OE PART#4798941 OUT OF STOCK-MAY NOT BE ABLE TO GET ANY MORE!! |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Pump Module W/Sending Unit Assembly Cherokee 1991-1993 This Is A Fuel Pump Module Assembly Complete With A Fuel Sending Unit & In Tank Fuel Filter Sock & Fuel Tank Seal With Lock Ring Assembly That Is Correct For All Jeep Cherokees With Fuel Injection From 1991-1993. This Fuel Pump Module W/Sending Unit Assembly Is Located Inside The Fuel Tank Of Your Cherokee & Comes As A Complete 1-Piece Assembly That Does Not Require Any Assembly Like Some Other Cheaper Brands That May Be Available. This Fuel Pump & Sender Is Made Here In The USA With Premium Metal & A Ceramic Fuel Card That Comes With A Thin Film Technology Which Is Coated With A PALLADIUM Unlike Older Style Copper Wiring Wound Style Fuel Senders That Can Corrode Over A Short Time & Give Out False Reading. This Fuel Pump Module Assembly W/Fuel Sender Is Made To Meet & Exceed The Original Manufacturers Specifications Not Only Electrically When It Comes To Ohms & Calibration But Also To Fit & Quality Of Steel To Be Exactly Shaped & Made To Be Formed To B e In Its Position At All Times Unlike Cheaper Overseas Metal Tubes That Easily Bend & Make It Possible To Kink When Installing. JEEP HAS LONG DISCONTINUED THIS FUEL PUMP MODULE ASSEMBLY & HAD A LIST PRICE OF $340.00 WAY BACK WHEN IT WAS EVEN AVAILABLE. WE ARE SELLING THIS FUEL PUMP MODULE AT A GREAT PRICE WHICH COMES WITH A 12-MONTH LIMITED WARRANTY THROUGH THE MANUFACTURER. GET IT HERE AT TEAM CHEROKEE. OE PART#5003868AA MANUFACTURER PART#JCSU9193-P |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Sending Unit Assembly Cherokee 1991-1993 This Is A Direct Replacement OE Style Fuel Sending Unit Assembly That Comes Complete With Sending Unit Lock Ring & O-Ring Sealing Gasket. This Fuel Sending Unit Is Specifically Designed To Fit All Jeep Cherokees From 1991-1993 Only. This Will NOT Fit The Diesel Tanks. We Also Have One Available On This Same Page With The Fuel Pump Attached If You Need That Instead. If Your Gas Gauge Is Showing You Inaccurate Readings From The Gas Tank-This Is Most Likely The Problem. Jeep Has Long Discontinued This Fuel Sending Unit & This One Was Just Released & Made Here In The United States. This Fuel Sending Unit Is Made To OE Specifications With Exact Tolerances & Made With Premium Steel For An Exact Fit With Every Fuel Sender. Get Your Fuel Sending Unit Here At Team Cherokee. OE REPLACEMENT SENDER#4637003 MANUFACTURER PART#JCSU-9193 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Tank Cherokee 1986-1996 This is a Brand New Replacement Style Steel Gas Tank. This is for all Jeep Cherokee and Wagoneer XJ'S with fuel injection from 1986-1996. This tank can also be purchased with the Fuel Tank Straps and Bolts for an additional $79.95, which is $10 less than the already discounted price for the straps alone. Replace the whole assembly now for this amazing price to guarantee a secure fit for whatever you will throw at your Jeep. |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Tank Strap Bolt OEM Cherokee 1984-1996 These are Factory Original Fuel Tank Strap Bolts for your 1984-1996 Jeep Cherokee. These OEM bolts are complete with the original LOCTITE to guarantee a secure fit once they are used on your Jeep. They are being sold individually or as a pair. Purchase them as a pair for close to 1/3 of the deal list price. Secure your fuel tank and replace the old rusted or stripped bolts today. Please Select The Quantity You Want To Purchase Below. THESE BOLTS ARE SELLING FOR MORE THAN DOUBLE THE PRICE EACH AT THE DEALER. OE PART#J3240023 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Tank Straps OEM Cherokee 1984-1996 Factory Original Fuel Tank Straps for your 84-96 Cherokee. These OE Straps are being Sold as a Pair & Will Include the Fuel Tank Strap Bolts. The Bolts Are also OE & Come with the Original Loctite (SEE PIC). If the straps that are currently holding your fuel tank are beginning to rust, or have already broken, then a serious safety issue has presented itself. You cannot afford to run the risk of causing significant damage to the tank. To purchase these straps with the bolts from a dealer would cost you over $300. We have a surplus of these items and are giving them to you at an unbelievable savings. Don’t let an opportunity like this pass by. Also check out the package that includes the fuel tank as well as the straps and bolts for an even more discounted price. OE STRAP PART#52000128 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Tank Support Bolt Set Cherokee OEM 1987-1996 This is a Set Of Factory Original Specially Hardened Bolts. These OEM Bolts Come as a Complete Set of 4-Bolts to Support the Fuel Tank Skid Plate For Cherokees from 1987-1996.These Bolts Normally Sell for More THAN DOUBLE OF WHAT WE ARE SELLING THESE OEM BOLTS FOR. GET THEM AT THIS PRICE WHILE WE HAVE QUANTITIES IN STOCK. |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Tank Vent Valve Grommet Set Cherokee & Comanche 1984-1996 These Are Direct Replacement Fuel Tank Vent Valve Grommets. That Grommets Hold The Fuel Tank Vent Valves Which Are On The Top Of The Fuel Tank Tightly In Place. The Rubber Grommets Tend To Dry Up & Crack Over Time Causing Either A Small Gasoline Leak Or Can Become Quite A Large Evaporation Leak Making Fumes Come Inside Your Cherokee & Comanche On All Size Gas Tanks Or Even Fail Emissions Due To The HC Levels Being High. These Fuel Tank Vent Valve Grommets Will Fit All Jeep Cherokees & Comanche Pick-Up Trucks As Well As The Wagoneer & Briarwood Models From 1984-1996.- EACH FUEL TANK HAS ( 2 ) GROMMETS - ONE FOR EACH VENT VALVE. PURCHASE THIS GROMMET AS EACH OR SAVE SOME MONEY & PURCHASE A PAIR. OE REPLACEMENT PART#52018823 |
|
|
|
||||
|
|
Click here for larger image
|
|
Gas Cap Cherokee & Comanche 1984-1999 This Direct Fit OE Replacement Style Gas Cap Is Made To Fit & Designed Specifically To Vent The Fuel Tank As The Manufacturer Intended For Emissions & Performance Reasons For Your Jeep Cherokee & Comanche From 1984-1999. The Gas Cap Will COMMONLY Cause Your ENGINE LIGHT To Come On If You Leave The Gas Cap Too Loose Or Forget & Leave It Off Or The Rubber Seal On The Back Of The Gas Cap Is No Good Anymore & It Does Not Seal Properly Causing The Improper Amount Of Pressure Or Lack Of Pressure Build Up-This Too Will Cause Your Engine Light To Come On Or Even Become An Emission Issue. Omix Builds Or Uses Gas Caps With Factory Specifications, In This Case Built By FRAM For OMIX To Make Sure That You Will Not Have Any Problems Of This Sort & Not Have A Universal Gas Cap That May Fit On The Filler Tube But Not Work As Your Cherokee Or Comanche Was Intended To Vent The Fuel Tank. Omix Has A Limited 3-Year Warranty For Defects On This Particular Part. OE REPLACEMENT PART#4637081 OMIX PART#17726.09 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Gas Cap Locking Cherokee & Comanche 1984-1999 This OMIX Brand Locking Gas Cap Which Is Actually Made By Fram For Omix Comes With 2-Keys & Helps Keeps Your Fuel Inside Your Fuel Tank Where It Belongs & Keeps Other People Honest. This Fuel Tank Filler Cap Or Gas Cap Will Fit All Jeep Cherokee & Comanches From 1984-1999. If You Live In A Large City & Park On The Streets At Night-You May Want A This Locking Fuel Tank Cap With The Prices Of Fuel Now A Days.This Cap Is Specifically Designed For Your Jeep & Not A Universal Gas Cap. Universal Gas Caps Tend To Trigger Engine Lights For Improper Pressure Randomly Making You Go To The Repair Station For No Reason. Get This Cap Today. OEM PART#4637081-L OMIX PART#17726.08 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Gas Pedal Pad OEM Cherokee & Comanche 1984-2001 This Is A Factory Original Accelerator Pedal Pad. This Accelerator Pedal Pad Is Made Of A Durable & Flexible Plastic That Is Like Rubber Which Is Designed To Fit & Is Correct For All Jeep Cherokee & Comanches From 1984-2001. If Your Accelerator Pad Is Just Plain Worn Out-Do Not Take Any Chances Of Your Foot Slipping & Change The Pedal Pad With A Brand New OE Gas Pedal Pad That Installs In Minutes With Minimal Tools. WE ARE SELLING THIS OE GAS PEDAL PAD FOR LESS THAN THE FACTORY ORIGINAL PRICE. OE PART#53003932AB |
|
|
|
||||
|
|
Click here for larger image
|
|
Gas Pedal Pin & Nut XJ These are factory original parts.This is the accelerator pad pin and nut.This holds the gas pedal to the lin kage.This will fit all Jeep Cherokee's from 1988-2006. |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Gasoline Fuel Gauge OEM Cherokee & Comanche 1991-1996 This Is A Factory Original Gas Gauge. This OE Gas Gauge Is For Gasoline Jeeps & Not Diesels. This OE Fuel Gauge Will Fit All Jeep Cherokees & Wagoneers & Comanche Pick-Up Trucks With Dash Gauges From 1991-1996. If Your Gas Gauge Is No Longer Working & The Fuel Sending Unit Has Already Been Replaced-This Would Be The Problem. Since This Is A Factory Original Gauge-It Just Plugs Right Into The Place Of The Old Gas Gauge & Does Not Need Anything Special To Install. JEEP WAS SELLING THIS SAME GAS GAUGE FOR ALMOST 170.00 & WE ARE SELLING THIS SAME FACTORY ORIGINAL GAUGE FOR A FRACTION OF THE PRICE WHILE OUR SMALL SUPPLIES LAST. GET THEM WHILE YOU CAN. OE PART#56005952 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: IDLE AIR CONTROL VALVE LIBERTY 04-06 KJ 3.7L This Is A OMIX Brand Direct Replacement OE Style Automatic Idle Speed Control Motor Made Specifically For The 3.7 Liter Engines On The 04-06 KJ Liberty's. This Automatic Idle Speed Control Motor Or Otherwise Known As The "AIC Motor" Will Fit All 04-06 Liberty's With The 3.7 liter Engine's. This is the most Common Cause of your Engine Revving Up & Down or Stalling when you First Start the Engine. Omix Builds Direct OE Replacement Jeep Parts & Accessories To The Manufacturer’s Original Specifications Allowing Them To Give A 3-Year Limited Warranty For Defects Only On All Their OE Replacement Jeep Parts Like This AIC Motor. OE REPLACEMENT PART#4861552AC OMIX PART#17715.08 |
|
|
|
||||
|
|
Click here for larger image
|
|
Injector O-Ring Seals Cherokee & Comanche 1991-2001 These are replacement o-ring seals for fuel injectors. These o-ring seals tend to dry up and leak after time.They will fit all Jeep Cherokees & Comanches & Wagoneers from 1991-2001 with a 2.5 liter engine & 1991-1996 with a 4.0 liter engine.These o-rings will come in a set for 4 injectors or 6 injector set.These are easily replaced and should be inspected every 30,000 miles or if your engine compartment smells like gasoline. NEW LOWER PRICE!! THE JEEP DEALER SELLS THESE O-RING KITS FOR ALMOST 3-TIMES THE PRICE FOR A SIMILAR EXACT RUBBER SEAL KIT. WHY SPEND THAT KIND OF MONEY-GET VALUE & QUALITY ON THIS PARTICULAR KIT!! OEM REPLACEMENT PART#4504348 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: K&N High-Flow Air Intake System 4.0 Liter Cherokee & Comanche 1991-1996 This K&N Air Intake System Is Specifically Designed To Fit & Work With All Jeep Cherokee's & Comanche Pick-Up Trucks With The 4.0 Liter Engine From 1991-1996 & Is Guaranteed to Increase your Horsepower By 7.11 HP. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. INCLUDES RECHARGER KIT. • Guaranteed to Provide more HP and Increased Acceleration • Engineered to Specific Vehicle Design • Easy to Install, Usually in 90 minutes or less! • Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions) NEW LOWER PRICE. PRACTICALLY PAYS FOR ITSELF IN MILEAGE WHILE YOU GET EXTRA POWER. K&N PART#57-1519 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: K&N High-Flow Air Intake System Jeep Cherokee 4.0L 1997-2001 This K&N Air Intake System is Designed To Fit All Jeep Cherokees With The 4.0 Liter Engine From 1997-2001. This Air Intake Is Guaranteed to give your Jeep an increase of 7.89HP. This black plastic molded tube that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. INCLUDES RECHARGER KIT. • Guaranteed to Provide more HP and Increased Acceleration • Engineered to Specific Vehicle Design • Easy to Install, Usually in 90 minutes or less! • Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions) OVERALL-MORE HORSEPOWER-BETTER MILEAGE-& MAY PAY ITSELF OFF IN GAS MONEY DEPENDING ON YOUR DRIVING HABITS OVER A PERIOD OF TIME. THE BEST BANG FOR THE BUCK. K&N PART#57-1518 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Lisle A/C & Fuel Disconnect Tool Set This A/C & Fuel Disconnect Tool Set Is Made To Easily Disconnect Air Conditioning Lines & Quick Connect Fuel Lines With Fuel Injection & Transmission Cooler Lines That Are Found On Most All Cherokee & Wrangler & Grand Cherokees & Jeep Liberty & Other Jeeps That Have These Quick Disconnect Lines. This Tool Kit Is Made By Lisle Which Always Means Premium Quality Plus It Was Made Here In The United States. This Set Includes 6-Different Sizes Including 5/16"-3/8"-1/2"-5/8"-3/4"-7/8" & The Most Popular Jeep Fuel Line Connector Would Be The 3/8" Fuel Line Connectors As You Will See In The Fuel Section We Sell Many Connectors & They Break Due To Improper Removal Many Times & For The Price Of This Kit-You Could Save Some Connectors -Even 2 & Fully Pay This Tool Kit Off. Well Worth The Money. Another Popular Jeep Size Not Shown Is 5/16". PURCHASE THIS KIT & SAVE MONEY ON CLIPS IN THE FUTURE DOING YOUR NEXT TRANS COOLER LINE REPLACEMENT OR FUEL LINE REMOVAL OR EVEN AN A/C LINE REMOVAL. NEW LOWER PRICE ON THIS ITEM!!! LISLE PART#37000 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Lisle Brake & Fuel & Transmission Cooler Metal Line Tube Bender Tool This Is A Lisle Brand Metal Tube & Line Bending Tool For Shaping & Bending Brake Line & Transmission Line & Fuel Line Tubes For All Your Full Size Jeeps & Grand Wagoneers & Jeep Grand Cherokees & Cherokees & Comanches & Wranglers & CJ's & Jeep Liberty & Commander & Any Kind Of Jeep Or SUV Or Classic Car That You May Be Restoring Or Just Fixing At The Moment. This Lisle Tool Is Made Here In The U.S.A. So You Know By The Lisle Name & Because The Tool Is Made Here-That This Tool Is A Premium Made Tool. Since Most Metal Lines Such As Brake Lines Are Impossible To Pre-Bend & Sell Because They Are So Long & Shipping Would Change The Shape & Cost A Fortune-This Tool Allows The Average Mechanic To Make ANY SHAPE LINE NEEDED TO FIT THEIR JEEP EVEN THOUGH THE LINES ARE LONG DISCONTINUED & BY MAKING THEM YOURSELF-YOU SAVE BUNDLES OF MONEY VERSUS BUYING THEM FROM JEEP TO BEGIN WITH. THIS BENDER CAN BEND STEEL & COPPER TUBING FROM 3/16"-1/4"-5/16"-3/8". THESE ARE THE MOST COMMON SIZES AROUND & SHOULD COVER ALL YOUR NEEDS. GET THIS LISLE TUBE BENDER TODAY. LISLE PART#44000 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Pitman Arm Cherokee & Comanche Manual Steering 1984-1993 This Is A Direct Replacement OE Style Pitman Arm.This Pitman Arm Is Specifically Designed & Made To Fit All Manual Steering Jeep Cherokees & Comanches From 1984-1993.Change out that worn out Pitman arm and get that tighter steering feeling again. Jeep Has Discontinued This Part & Would Charge 3-Times The Price For The Same Quality Piece Of Steel. Get This Hard To Find Part At A Bargain. OE REPLACEMENT PART#52000616 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Proportional Purge Solenoid Valve OEM Liberty 2002-2007 This Factory Original Proportional Purge Solenoid Valve Is The Emission Valve That Continually Pumps Clean Air Electronically Through The Vapor Purge Harness Which Allows The Leak Detection Pump To Sense Any Fuel Vapors That May Be Coming From The Gas Tank Or Engine That Can Be Harmful Or Cause Problems With HC Levels For Emissions. This Will Cause An Engine Light To Come On When This Proportional Purge Solenoid Stops Working But May Not If Does Not Work Properly. If It Starts To Cause Louder & Louder Clicking Noises At Idle -This May Be An Indication That It Is Starting To Work Harder Than Before & Is Staring To Get Weaker & Not Work Properly. This Purge Solenoid Will Fit All Jeep Liberty Models & Cherokees From 2002-2007 With The 2.2 & 2.4 & 2.5 & 2.7 Liter Engines. A Very Important Emission Item That Can Go Bad Quickly If You Like To Overfill Your Gas Tank Each Time You Add Gasoline To Your Jeep Cherokee Or Liberty. WE SELL THIS FOR MUCH LESS THAN THE DEALER LIST PRICE. OE PART#52090419AA |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Rear Fuel Line Clip Set OEM Cherokee & Comanche 1984-1996 These Factory Original Fuel Line Clips Hold The Fuel Lines Underneath The Frame Rail Tightly On Place From The Front & Rear Of Your Jeep Cherokee & Comanche. These Clips Come In A Complete Set Of 6-OE Clips & Will Fit All Jeep Cherokees & Comanches Including Wagoneer From 1984-1996. WE SELL THESE CLIPS FOR MUCH LESS THAN DEALER LIST PRICE. THEY JUST POP INTO THE FRAME. OEM PART#53000585 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: RUGGED RIDGE THROTTLE BODY SPACER CHEROKEE & COMANCHE 1991-2001 The Rugged Ridge Throttle Body Spacer raises the throttle body 1 in. above the intake manifold. The lift helps optimize power and performance by drawing in colder denser air. The large bore design allows your system to inhale a larger volume of air producing more horsepower and torque. It features solid aluminum construction with a slick anodized finish, and is a bolt on performance adder for both 4.0 liter engines on all Jeep Cherokees & Comanches from 1991-2001 & all Jeep Cherokee & Comanches with the 2.5 liter engine from 1991-2000 ONLY. GET YOURS NOW--YOU KNOW YOU NEED EVERY BIT OF GAS MILEAGE & IT WILL PAY FOR ITSELF. COMES WITH INSTRUCTIONS. RUGGED RIDGE PART#17755.01 |
|
|
|
||||
|
|
Click here for larger image
|
|
Throttle Position Sensor 4.0 Liter Automatic Trans Cherokee 1987-1990 This is a factory original part. This is an OEM throttle position sensor. This sensor will fit all Jeep Cherokees with the 4.0 liter engine and automatic transmission.This commonly causes a hesitation when accelerating when this part goes bad.You may also notice a lack of power on acceleration.This part is easy to replace. |
|
|
|
||||
|
Pages: [<<] 1 2 3 [>>] | |
||