New Jeep Grand Wagoneer Fuel Systems Parts
 |
||||
|
Browse through our selection of genuine Jeep Grand Wagoneer parts.
If you need a part but don't see it here, e-mail us at parts@teamgrandwagoneer.com and we'll do our best to locate it for you. Or if you prefer, call us at (262) 658-2268. Order safely and securely: Clicking on the purchase button for any of the parts below will take you to our secure online ordering system. All prices below are quoted in U.S. dollars. Shipping charges are additional. 30-day warranty on parts: Parts must be returned in original package and are subject to a 20% restocking fee. No returns on electrical items. Customer must pay for return shipping. |
|
||
|
||||
|
Pages: 1 2 3 [>>] | |
||
|
|
Click here for larger image
|
|
Accelerator Pedal Cable V8-360/401 GW 1978-1991 This Is A Omix Brand Direct Replacement OE Style Accelerator Pedal Cable Specifically Designed To Fit The V8-360 & 401 Engines On The Full Size Jeeps. This Direct Fit Accelerator Cable Is The Correct Style & Is Made To Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks From 1978-1991 With The V8-360 & 401 Engines. Get Rid Of Your Potentially Very Dangerous Sticking Accelerator Pedal Or If You Have A Gas Pedal That Seems To Always Be Stiff Or It Seems Like It's Getting Stuck-You Most Likely Have An Accelerator Cable Problem & You Could Be In A Situation That May Lead You Into An Accident That You May Not Be Able To Control Or Stop Causing Damage Or Worse. A New Accelerator May Improve Your Gas Mileage If Your Accelerator Cable Sticks At A Higher Idle When Starting Up Your Engine At At These Gasoline Prices Now This Cable Will Easily Pay Itself Off. More Important Though If Your Cable Sticks At Times For No Reason At All-You Can Get Hurt Or Cause Damage To Others & For A Few Dollars & 15-40 Minutes Top Of Your Time In Labor-It Would Be Well Worth It. OMIX Also Gives A Limited 3-Year Warranty For Any Material Defects On This New Accelerator Cable When You Purchase The Cable Here From Us. OE REPLACEMENT CABLE#53005205 OMIX PART#17716.14 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Accelerator Pedal Pad GW 1968-1991 This Is A Omix Brand Direct Replacement OE Style Accelerator Pedal Pad. This Accelerator Pedal Pad Is Made Of A Durable & Flexible Plastic That Is Like Rubber Which Is Designed To Fit & Is Correct For All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chief & The Jeep J-10 & J-20 Pick-up Trucks From 1968-1991. If Your Accelerator Pad Is Just Plain Worn Out-Do Not Take Any Chances Of Your Foot Slipping & Change The Pedal Pad With A Brand New OE Gas Pedal Pad That Installs In Minutes With Minimal Tools. Omix Gives A Limited 3-Year Warranty On This Gas Pedal Pad. SAVE PLENTY OVER A OE PEDAL FOR THE SAME QUALITY. OE REPLACEMENT PEDAL PAD#53003932AB OMIX PART#17733.03 |
|
|
|
||||
|
|
Click here for larger image
|
|
Accelerator Pedal Spring GW 1974-1991 This Is A Direct Replacement OE Style Spring. This is the accelerator spring that goes behind the gas pedal itself inside of your Full Size Jeep. This exact fit accelerator spring is the correct size & will fit all Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks From 1974-1991. If your gas pedal sticks & or if the pedal squeaks when your are pushing the gas pedal down or if the gas pedal is just to weak & goes to the floor too fast without any resistance-this is most likely the cause. This Spring Was Discontinued From Jeep But We Now Have Found Another Source & At A Batter Price. OE REPLACEMENT PART#J3193369 CROWN SPRING#3193369 |
|
|
|
||||
|
|
Click here for larger image
|
|
Accelerator Pump Diaphram Assembly GW 1981-1990 This is a Accelerator Pump Diaphragm Assembly. This carburetor accelerator pump diaphragm assembly helps pump gasoline into the carburetor on acceleration. This will fit all Jeep Wagoneers & Full Size Wagoneers & J-10 Trucks from 1981-1990 with the 2-Barrel Carburetor. This is a common fix to hesitation on acceleration. This Accelerator Pump Is Located On The Outside Of The Carburetor & Takes Only Minutes To Install Without Changing The Adjustments Of The Carburetor. |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Cleaner Pre-Heater Tube Complete Kit GW 1979-1991 This Is A Quality Made Pre-Heater Tube Kit That Mounts Into The Passenger Side Manifold When The Sheet Metal Holder RUSTS Apart. With this kit-it will allow you to install the cold air pre heater tube to the Manifold WITHOUT Drilling or Replacing the Expensive Exhaust Manifold. The spring mounts over the manifold and with the adapter-it allows you to place the tube inside and warm up the Carburetor as needed. This Pre-Heat Tube Kit Will Fit On All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 Engine From 1974-1991. THIS PRE-HEATER TUBE KIT IS NOW DISCONTINUED & NO LONGER AVAILABLE. WE HAVE LESS THAN A DOZEN KITS AVAILABLE. WE DO SELL THE TUBE SEPARATELY ON THIS WEB SITE HOWEVER THIS KIT TO MOUNT IT WILL NOT BE AVAILABLE. OUT OF STOCK!!!!! |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Cleaner Pre-Heater Tube GW 1979-1991 This Is A Quality Made Air Cleaner Pre-Heater Tube. This Air Cleaner Pre-Heat Tube Is The Correct Size & Will Fit On All V8-360 Engines On Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks From 1979-1991. The picture is shown in its shipping form and can be stretched to the proper length. This hose is sized specifically for your Jeep. |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Air Cleaner Thermal Vacuum Switch 4.2 Liter GW 1980-1988 This Is A OE Style Direct Replacement Thermal Ported Vacuum Switch That Is Located On The Side Of The Air Cleaner Assembly Which Hooks Up Into Your Emission Vacuum Harness On A 4.2 Liter Engine. This Air Cleaner Thermal Vacuum Switch Is Specifically Designed & Correct For All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Jeep J-10 & J-20 Pick-up Trucks From 1980-1988.This Thermal Vacuum Switch Works Off The Temperature Of The Intake Manifold & Then Opens The Flap Of The Air Cleaner Once Warmed Up To Allow Fresh Air To Be Forced In To Get Better Mileage & Performance Once The Engine Is Properly Warmed Up. This Thermal Vacuum Switch Is The Same Or Better Than The OE Switch & For 50% Of The Dealer List Price With The Same 12-Month Warranty. OE REPLACEMENT PART#J3237457 |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Cleaner Vacuum Tee GW 1974-1991 This is a Factory Original Vacuum Tee.This OEM Vacuum Tee Attaches to the Harness at the Air Cleaner Connecting The YELLOW/WHITE REVERSE DELAY VALVE & GRAY/WHITE & WHITE/BLACK Delay Valves. This will fit all Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees as well as J-10 & J-20 Pick-Up Trucks From 1974-1991 with the V8-360 Engine as well as the Six Cylinder-258 4.2 Liter Engine. YOU WILL ONLY NEED ONE OF THESE VACUUM TEES FOR YOUR FULL SIZE JEEP. THESE ARE BECOMING VERY LIMITED FROM JEEP BUT WE ARE STILL SELLING THIS PART FOR LESS THAN THE DEALER LIST PRICE. OEM PART#J3210891 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Air Intake Hose Replacement GW 1979-1991 This Is A Direct Replacement OE Style Air Intake Hose That Is Attached To The Air Cleaner Going To The Carburetor. This Air Intake Hose Allows You To Bring Fresh Air To The Carburetor Which Aides In Performance & Mileage. This Air Intake Hose Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks With Both The V8-360 & 4.2 Liter Engines. If You Have A Torn Up Air Intake Hose-This Would Be The Best Time To Replace It & Take Advantage Of The Benefits. JEEP HAS DISCONTINUED MAKING THIS PART SO THIS IS THE ONLY ONE AVAILABLE NOW. SAME QUALITY & WARRANTY-BETTER PRICE. FINALLY BACK IN STOCK!! OE REPLACEMENT PART#J5358444 CROWN PART#5358444 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: BBD Type Electronic NEW Carburetor W/Stepper Motor 4.2 Liter GW 1981-1986 This Is A Direct Replacement OE Style Brand New BBD Type Carburetor Assembly With The Electronic Feedback Steeper Motor Assembly Attached That Was Made For Crown Auto Sales Specifically For The 4.2 Liter Jeep Engine. This Brand New Direct Fit Carb Is Correct & Will Fit All Jeep Wagoneers & Grand Wagoneers & Cherokee & Jeep J-10 & J-20 Pick-Up Trucks With The 4.2 Liter Engine From 1981-1986 With The Electronic Feedback Carburetor. This Carburetor Will Replace Your Carb Exactly With Your Tag#s If You Have These Very Specific Tags On Your Carbs Which Should Be Transferred When Replacing. These Tag Numbers Are #8838,#8339,#8340,#8341,#8357,#8360;#8362,#8364,#8367,#8383,#8384,& #8394. If Your Carburetor Is Always Running Rough Or The Stepper Motor Just Is Not Working Correctly Any More-Or You Can Not Adjust Your Original Carb After It Has Been Overhauled Once Or Twice Or Maybe The Re-manufactured Carburetor In Your Jeep Is Not Doing The Job It Should-Then Maybe This Brand New Carburetor Is What You Need. Jeep Would Charge Almost 700.00 For This Carb Brand New When It Was Available Many Years Back. Crown Gives A Limited 12-Month Warranty Replacement On This Carburetor For Material Defects Only-Not Adjustments. We Are Also Including 2-NEW CARBURETOR GASKETS WITH THIS CARB AT NO-CHARGE-PART#J3235405 TO MAKE SURE THIS CARBURETOR IS SEALING PROPERLY AFTER YOU INSTALL IT. WE ALSO RECOMMEND THAT IF YOU ARE HAVING RUNNING PROBLEMS-TO CHECK YOU TIMING ADJUSTMENT BEFORE REPLACING THE CARB & AFTER TO MAKE SURE THE TIMING CHAIN IS OK & TIMING IS SET CORRECTLY AS THE TIMING ADJUSTMENT IS THE MOST IMPORTANT ON THIS ENGINE. OE REPLACEMENT CARB#83320007 CROWN CARB PART#83320007 |
|
|
|
||||
|
|
Click here for larger image
|
|
Carburetor Base Insulator Plate GW 1974-1991 This Is A Premium Made Direct Replacement OE Style Plastic Insulator Plate That Goes Underneath The Base Of The Carburetor. This Direct Fit Carburetor Base Insulator Plate Is Correct For All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Cherokee Chief & Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 2-Barrel Motorcraft Carburetor From 1974-1991. This Is A Must Have Part When Replacing A New Or Re-Manufactured Carburetor Or Even When Overhauling Your Own Carb As They Tend To Crack Causing Major Vacuum Leaks. Most Times When The 2-Barrel Carburetor Is Running Rough-You May Only Need This Base Plate Insulator As It Becomes So Brittle Over Time From The Heat That Most Mechanics Overlook This Insulator Plate & Do Not Realize How Important That Any Vacuum Loss Will Cause A Running Problem For This Engine. This INSULATOR PLATE IS INCLUDED When You Purchase A CARBURETOR FROM US-NOTE THAT YOU WILL NOT FIND THAT WHEN GETTING A CARBURETOR FROM ANYONE ELSE. GET THIS HARD TO FIND LOWER PRICED BASE INSULATOR HERE FOR YOUR JEEP. OE REPLACEMENT PART#J3240515 |
|
|
|
||||
|
|
Click here for larger image
|
|
Carburetor Float GW 1977-1978 This is a quality replacement float assembly. This will fit only the six cylinder 258 engine with 1 or 2 barrel carbs on 1977-1978 Jeep J-10 Trucks and Wagoneers with this 258 engine.This is a common problem on this carb for hard staring.This float set is made of brass. |
|
|
|
||||
|
|
Click here for larger image
|
|
Carburetor Gasket GW 1974-1991 This Is A Direct Replacement OE Style Carburetor Gasket Made By Fel-Pro That Is Installed Underneath The Carb & Touches The Intake Manifold. This Carburetor Base To Intake Manifold Gasket Must Always Be Replaced When Changing & Even Just Removing Your Carburetor At All Times To Ensure That You Will Not Have Any Vacuum Leaks. This Carburetor Base To Intake Manifold Gasket Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chief & All Jeep J-10 & J-20 Pick-Up Trucks With The OE 2-Barrel Carburetor & The V8 360 & 401 Engines From 1974-1991. We Highly Recommend Replacing This Gasket Anytime Your Carb Is Being Changed. This Gasket Does Not Come With A Carb If You Purchase Anywhere Else BUT WE DO INCLUDE IT WITH THE PURCHASE OF A CARBURETOR FROM US AT TEAM GRAND WAGONEER. PLEASE NOTE WE ALSO SELL THE HARD PLASTIC CARBURETOR BASE INSULATOR GASKET ON THIS SECTION OF THE WEB SITE WHICH IS ALSO NEEDED WHEN REPLACING A CARB. FEL-PRO#60102 |
|
|
|
||||
|
|
Click here for larger image
|
|
Carburetor Gasket Set 4.2 Liter OEM GW 1981-1986 These Are Factory Original Carburetor Gaskets. These OE Carburetor Gaskets Are Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Jeep J-10 & J-20 Pick-Up Trucks With The 4.2 Liter Engine From 1981-1986 With & Without The Electronic Feedback Motor Carburetor. Your Carb Will Require 2-Of These Same Gaskets As You Will Need One On The Base Of The Carb At The Intake Manifold & The Other Gasket Between The Insulator & The Carb Itself. If You Are Experiencing A Vacuum Leak & You Are Not Sure Where It Is From-Just Spray Carefully A Little Carb Cleaner Under The Base Of The Carb-If The Idle Increases In Any Way At Idle-Your Gaskets Are Leaking & Need Replacement As You Are Losing Money On Poor Mileage & Performance. We Always Recommend Changing These Gaskets When Replacing The Carb On Your Full Size Jeep. We Also Have The Carburetors Available For Your Jeep In This Section Of The Web Site. JEEP HAS DISCONTINUED THIS CARB GASKET & NO LONGER WILL CARRY THEM. OE PART#J3235405 |
|
|
|
||||
|
|
Click here for larger image
|
|
Carburetor Overhaul Kit 4.2 Liter GW 1982-1986 This Is A Complete Carburetor Overhaul Rebuild Kit For The 4.2 Liter 258 Cubic Inch Engine On All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks From 1982-1986 With The Carter 2-Barrel BBD Type W/Electronic Feedback Motor. If Your Carb Is Internally Bad & Needs Overhauling-Your Engine Is Running Poorly Which Causes Poor Acceleration & Long Hard Starts & Bad Gas Mileage Which Can Cost More Money Than The Overhaul Kit Itself In Just A Few Gas Tanks. Don't Let Your Engine Run Rough & Foul Your Spark Plugs Which Also Costs The Same Price Of The Kit-Purchase The Kit & Do Something About It & Make Your FSJ Run Like It Always Should.Why Spend The Big Money Replacing The Carb If You Know How To Overhaul Your Own Carburetor. For The Small Price Of The Carb Overhaul Kit-How Can You Go Wrong. Try It Out & Test It & Get Some Satisfaction That Your Time Is Worth A Lot Of Money. OE REPLACEMENT PART#J8134232 CROWN KIT PART#8134232 |
|
|
|
||||
|
|
Click here for larger image
|
|
Carburetor Overhaul Kit GW 1981-1991 This is a Carburetor Kit for all V8 360 engines for all Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Jeep J-10 & J-20 Pick-Up Trucks from 1981-1991. This kit includes The Carb Base Gasket-Power Valve-& Internal Gaskets needed to Overhaul Your Original Motorcraft 2150 Factory Carb. Instructions & Specifications are included in the kit. PART#83502174 |
|
|
|
||||
|
|
Click here for larger image
|
|
Carburetor Remanufactured GW 1981-1991 This Is A Direct Replacement Remanufactured 2-BBL Motorcraft Carburetor. This Carburetor Was The Original Brand & Style Carb That Came Originally Installed On Your Full Size Jeep When It Was Made At The Factory & Now Has Been Overhauled & Redone To Work Like Brand New Again. This Remanufactured Carburetor Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 Engine. These Carburetors Are Slightly Modified To Get Better Performance & Mileage Over The Factory Original Carbs To Perform More Efficiently. We Are Also Including The 3-Needed Gaskets That Will Be Required To Install A Carburetor Which Include The Base Gaskets & Carb To Base Gasket To Prevent Any Vacuum Leaks You May Have From A Cracked Or Bad Gasket. If YTour Engine Is Running Very Rough On Acceleration Or The Idle Is Very Bad Cold & OR Warm-This Carburetor May Be The Problem. PLEASE CHECK THE TIMING FIRST BEFORE CHANGING A CARBURETOR-TIMING IS THE MOST IMPORTANT ADJUSTMENT FOR THE CARB. NO CORE IS REQUIRED ON THIS CARBURETOR. NO RETURNS ALLOWED ON THIS ITEM-ONLY AVAILABLE FOR EXCHANGE IF PACKAGE & SEAL NOT OPENED. CROWN PART#9-117 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Edelbrock Intake Manifold Bolt Set V8-360-401 GW 1974-1991 This Is A Edelbrock Intake Manifold 8- Hex Head Bolt Set Made Specifically For The V8-360 & 401 Engine. This Edelbrock Intake Manifold Bolt Set Is Made Of Steel Cadmium & Comes With A Hex Head Design. This Edelbrock Intake Manifold Bolt Set Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 & 401 Engines From 1974-1991.Anytime You Replace An Intake Manifold Or You Want To Change The Gasket Set-These Bolts Should Be Replaced. THESE ARE ONLY SOLD AS A COMPLETE SET. EDELBROCK PART#8534 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Edelbrock Performer Series 600CFM Carburetor GW 1968-1991 This is a Edelbrock Performer Series 600 CFM Carburetor. This carburetor is 50-state street legal for all 1980 and earlier V8s. Calibrated for maximum fuel economy. Includes timed vacuum ports, EGR and fuel vapor outlet. Not for computer-controlled engines. Comes with the following jets, rods and springs: Metering Jets - Primary .098, Secondary .095; Metering Rods - .073 x .047; Step-Up Spring - orange (5" Hg). Includes carb studs and hardware. This carburetor comes complete with the electric choke & is equipped for your EGR Valve which makes this carb street legal in all 50-states. This 4-barrel carb will put out more performance than the factory 2-barrel carburetor & will require your engine to run well when installing. We also highly suggest that you install this carb with the performer series heads & manifold to complete the essential power & performance you may need especially if you take your Full Size Jeep on the trails or off-road. This Edelbrock carburetor comes brand new or re-manufactured by Edelbrock for a savings. CHOOSE THE CORRECT EDELBROCK CARB YOU NEED FOR YOUR JEEP. THIS CARB WILL FIT YOUR GRAND WAGONEER & FULL SIZE WAGONEER & CHEROKEE & JEEP-J-10 & J-20 & J3000 PICK-UP TRUCK WITH THE V8-327 & 360 & 401 ENGINES FROM 1968-1991. SOME MODIFICATIONS MAY BE REQUIRED WITH THROTTLE LINKAGE. EDELBROCK NEW CARB-#1400 EDELBROCK REMAN CARB#9900 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Filler & Vent Hose Set GW 1981-1991 FINALLY THEY ARE HERE. GRAND WAGONEER FUEL FILLER & VENT HOSES. We Are Selling These Fuel Vent & Filler Hoses ONLY As A Complete Set-In Other-Wards As A Pair Only. These Are The 2-Hoses That Are Connected To The Polyurethane Or Otherwise Known As Plastic Gas Tank & Then Go Up To The Fuel Filler Neck Where The Gasoline Is Added To Fuel Pump. These Hoses Are Direct Replacement OE Style & Are Molded Exactly Like The Factory Original Hoses Were. We Are Also Including With This Fuel Filler & Vent Set 4-Stainless Steel Hose Clamps To Help Attach These Fuel Filler & Vent Hoses & Made Sure They Were Made Of Stainless So They Would Never Rust Out Unlike The Original Clamps. This Fuel Filler & Vent Hose Set Will Fit All Jeep Grand Wagoners & Full Size Wagoneers From 1981-1991. If You Are Leaking Gasoline When Adding Fuel To Your Gas Tank Or When You Fill Up The Tank All The Way You Tend To Smell Gasoline All The Time-One Or Both Of These Hoses Can Or Is Dried & Cracked Or Just Plain Leaking Gasoline Through Saturation. This May Be A Dangerous Situation & If You Smell Gasoline At Any Time From The Rear Of Your Grand Wagoneer--This Is Almost ALWAYS The Problem. Replace These Hoses If They Are Even Slightly Cracked Before They Become A VERY LARGE ISSUE. ACT NOW-WE HAVE A SALE ON THESE. GET THEM WHILE WE HAVE A OVERSTOCK CLEARANCE. SALE WILL NOT LAST TOO LONG-POSSIBLY UNTIL THE END OF THIS YEAR AS OUR OVERSTOCK SUPPLY HAS ALMOST VANISHED. OE REPLACEMENT PART#'S FUEL FILLER#J5361183 FUEL VENT#J5361184 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Filler & Vent Hose Set J-Truck 1979-1987 This Is A Set Of Direct Replacement OE Style Fuel Filler & Fuel Vent Hoses For The 18-Gallon Tanks That Are Found On All Jeep J-10 & J-20 Pick-Up Trucks From 1979-1987 With The FRONT Filler Fuel Tanks ONLY. These Fuel Filler & Vent Hoses Are Pre-Formed & Cut To An Exact Size To Fit Your J-Trucks Fuel Tank Directly Without Any Problems. If Your Pick-Up Trucks Fuel Tank Filler & Vent Hoses Are Dry & Cracked & Most Likely Leaking At This Point-You Will Most Certainly Want To Replace These Hoses At This Time To Get Rid Of Any Fuel Vapor Smell That Might Be Coming Inside Your Cabin Compartment. These Hoses Can Give Off A High Level Of HC Vapors Causing Your Truck To Fail Emissions If You Could Even Stand The Smell Or You Are Just So Used To The Smell Already. This Hose Kit Will Be Sold As Each Or As A Pair. If You Purchase These Fuel Filler & Vent Hoses As A Pair-We Will Also Include At No Extra Charge A Set Of Stainless Steel Hose Clamps To Help You Install These Hoses & Keep Them On For A Rust Free Long Time. These Hoses Are Both Made Here In The USA & Come With A Limited 5-Year Warranty From The Manufacturer From Any Material Defects. OE FUEL FILLER HOSE#J5361182 OE FUEL VENT HOSE#J5361188 MTS FILLER PART#JPFH-0013 MTS VENT HOSE#JPVH-0013 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Filler & Vent Hose Set Side Fill Tank J-Truck 1963-1977 This Is A Set Of Direct Replacement Fuel Filler & Fuel Vent Hoses For The Fuel Tanks With The Side Fill Fuel Tank On All Jeep J-10 & J-20 & Jeep Gladiator Trucks From 1963-1977 Equipped With The 18-Gallon Fuel Tanks. These Fuel Filler & Vent Hoses Are Pre-Formed & Cut To An Exact Size To Fit Your J-Trucks Fuel Tank Directly Without Any Problems. The Fuel Filler Hose Comes Complete With Flange Attached On The Hose Itself. If Your Pick-Up Trucks Fuel Tank Filler & Vent Hoses Are Dry & Cracked & Most Likely Leaking At This Point-You Will Most Certainly Want To Replace These Hoses At This Time To Get Rid Of Any Fuel Vapor Smell That Might Be Coming Inside Your Cabin Compartment. These Hoses Can Give Off A High Level Of HC Vapors Causing Your Truck To Fail Emissions If You Could Even Stand The Smell Or You Are Just So Used To The Smell Already. This Hose Kit Will Be Sold As Each Or As A Pair. If You Purchase These Fuel Filler & Vent Hoses As A Pair. These Hoses Are Both Made Here In The USA & Come With A Limited 5-Year Warranty From The Manufacturer From Any Material Defects. SIDE FILL FUEL TANK FILLER HOSE#JPFH-0011WF SIDE FILL FUEL TANK VENT HOSE#JPVH-0011 |
|
|
|
||||
|
|
Click here for larger image
|
|
Fuel Filter OEM GW 1974-1991 This is a Factory Original Fuel Filter. This OEM Fuel Filter Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers As Well As Jeep J-10 & J-20 Pick-Up Trucks & Full Size Cherokee & Cherokee Chiefs With The V8-360 & 401 Engines & The 258-4.2 Liter Engine. This Fuel Filter Should Be Replaced Every 15000 Miles Or Every Year To Keep The Carburetor From Getting Dirty Or Contaminated. OEM PART#5015596AA |
|
|
|
||||
|
|
Click here for larger image
|
|
Fuel Filter Omix Brand GW 1974-1991 This OMIX Brand Fuel Filter Comes With All The Necessary Clamp Springs & Hose Attachments To Make Installing This Fuel Filter A Snap. This Fuel Filter Will Fit The 4.2 Liter 258 Cubic Inch Engine As Well As The V8-360/401 Engines On All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chiefs & Jeep J-10 & J-20 Pick-Up Trucks From 1974-1991. With Being A OMIX Brand Fuel Filter-You Also Get A 3-Year Limited Warranty For Defects On This Fuel Filter.This Fuel Filter Should Be Replaced Every 15000 Miles Or Every Year To Keep The Carburetor From Getting Dirty Or Contaminated. Get One Or A Couple Today For Your Full Size Jeep At This Price. OE REPLACEMENT PART#5015596AA OMIX PART#17718.02 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Fuel Gauge GW 1976-1984 This Is An Exact Replacement Fuel Gauge. It Installs The Same Way & Fits Exactly Like A Factory Original Fuel Gauge. This Fuel Gauge Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees As Well As Jeep J-10 & J-20 Trucks From 1976-1984. If You Fuel Sender Has Been Replaced & You Still Can't Tell How Much Gas You Have In The Tank-This Is Most Likely The Problem. For The Low Price Of This Fuel Gauge You Can Get That Fixed & Stop Guessing When You Will Run Out Of Gas. Get Yours Now & Finally Fix Your Full Size Jeep. OE Part Number On This Fuel Gauge Was # J8126927 |
|
|
|
||||
|
Pages: 1 2 3 [>>] | |
||