New Jeep Grand Wagoneer Exhaust Parts

	Browse through our selection of genuine Jeep Grand Wagoneer parts. If you need a part but don't see it here, e-mail us at parts@teamgrandwagoneer.com and we'll do our best to locate it for you. Or if you prefer, call us at (262) 658-2268. Order safely and securely: Clicking on the purchase button for any of the parts below will take you to our secure online ordering system. All prices below are quoted in U.S. dollars. Shipping charges are additional. 30-day warranty on parts: Parts must be returned in original package and are subject to a 20% restocking fee. No returns on electrical items. Customer must pay for return shipping.
	Click here for larger image		Air Injection Hollow Bolt 4.2 Liter GW & J-10 Truck 1977-1984 These are factory original parts.This is a air injection hollow bolt set for the 258 cubic inch engine.These air tube hollow bolts have holes inside to allow air to go thru the air injection pipe and cool down the engine as well as keep your engine running properly for emission reasons.These bolts will fit all Jeep Wagoneers and J-10 Trucks and Cherokees with the 258 six cylinder engine from 1977-1984.These will be sold as a complete set of 6 hollow tube bolts or as each. Price: $11.95 1 Hollow Bolt - $11.95Set Of 6 Hollow Bolts - $62.95 Quantity :
	Click here for larger image		Catalytic Converter GW 1974-1991 This is a direct fit style catalytic converter. This catalytic convertor will fit all Jeep Grand Wagoneers from 1974-1991 with the V8-360 engine. This converter is equipped with the air pipe inlet. Price: $195.00 Quantity :
	Click here for larger image		Convertor Downstream Air Tube Kit GW 1974-1991 This is a stainless steel catalytic convertor downstream air tube complete kit.This kit attatches to the catalytic convertor air pipe attatchment and goes all the way up in the engine compartment so that one of the check valves attatches to the air pump hose making the exhaust run cooler and cleaner for emissions.This will replace your rotted noisey downstream tube. This will fit all Jeep Grand Wagoneers and Full Size Wagoneers and Cherokees as well as J-10 Trucks from 1974-1991 with the V8-360 engine. This stainless steel tube is flexible for easier installation and yet strong enough to not rust again. This can be cut to a smaller size if you install it tighter and comes with the proper clamps to keep it from leaking any exhaust fumes.This will be sold with or with out the check valve attatched. Price: $59.95 Air Tube Kit - $59.95Airtube Kit W/Check Valve - $69.95 Quantity :
	Click here for larger image		E.G.R. Valve GW 1983-1989 This egr valve will fit all V8 360 cubic inch Jeep Grand Wagoneers from 1983-1989.The EGR valve comes with gasket. Price: $59.95 Quantity :
	Click here for larger image		Exhaust Manifold Hollow Bolt GW These are factory original hollow bolts that fit into the exhaust manifold. These will be sold individually. Each Jeep only has 4 of these. Replace as needed. They will fit all Full Size Jeeps including Grand Wagoneers with V8-360 engines from 1974-1991. Please check out the 8 piece mainfold bolt set that goes with these 4 hollow bolts. These are becoming limited. Price: $17.95 Quantity :
	Click here for larger image		Exhaust Manifold Gasket Set This is a quality replacement exhaust manifold gasket set. This set will fit all Jeep Grand Wagoneers and Full Size Jeeps and J-Trucks with a V8-360 engine from 1974-1991. Price: $9.95 Quantity :
	Click here for larger image		Exhaust Manifold Mounting Bolts This is a set of factory replacement grade 5 bolt set.These bolts are for mounting the exhaust manifolds for a V8-360 Jeep engine.They will wit all Jeep Grand Wagoneers and Full Size Jeeps from 1975-1991 with the V8-360 engine.Acomplete set of 8 mounting bolts. Does not include bolt tubes for air pipes. Price: $10.00 Quantity :
	Click here for larger image		Exhaust Manifold Plug Set GW 1974-1991 This is a plug set. This set is made to plug the holes on the exhaust manifold where ther air pipe is supposed to be installed on Grand Wagoneers -Full Size Jeeps and Wagoneers and Cherokees with the V8-360 engine from 1974-1991.We only recommend you plug your manifold in non emmision states.This will come as a complete set of 6 plugs. Price: $4.95 Quantity :
	Click here for larger image		Exhaust Manifold Set GW 1981-1991 This set includes both side exhaust manifolds with gaskets. It will fit all V8-360 Jeep Grand Wagoneers and Full Size Wagoneers from 1981-1991.Note that the passenger side manifold comes with the shield attatched for the cold air intake hose. This is how it was from the factory to get warm air to warm up the carburetor. Price: $395.00 Quantity :
	Click here for larger image		Exhaust Manifold Studs These are factory original parts.These are factory original manifold studs that are used to attatch the exhaust y-pipe.This is a 4 piece stud set 2 studs for each side.This will fit all Jeep Grand Wagoneers and Full Size Jeeps with a V8-360 engine from 1974-1991. Price: $13.95 Quantity :
	Click here for larger image		Front Pipe To Dampner Seal GW 1975-1991 This is a replacement exhaust doughnut seal.This is the seal that goes on the manifold between the dampner of the front pipe on the pasengerside. This will fit all Jeep Grand Wagoneers and Full Size Wagoneers and Cherokees as well as J-10 Trucks with the V8-360 engine from 1975-1991.This seal commonly leaks causing fumes to come inside and the engine to become noisier.Please check you dampner operation at the same time. Price: $4.95 Quantity :
	Click here for larger image		Hangar Axlepipe This is a factory original axle pipe hangar insulator. This hangar will fit all Jeep Grand Wagoneers and Full Size Cherokees and Wagoneers from 1975-1991 with a v8-360 engine.
	Click here for larger image		Hangar Reinforcement Plate This is a factory original part. This is the reinforcement bracket plate for the exhaust hangars. Each Grand Wagoneer has 2 of these.This will fit all Jeep Grand Wagoneers and Full Size Wagoneers from 1976-1991 with a V8-360 engine. Price: $6.00 Quantity :
	Click here for larger image		Hangar Tailpipe This is a factory original tailpipe insulator hangar.This is the the hangar at the end of the tailpipe. This will fit all Jeep Grand Wagoneers and Full Size Cherokees and Wagoneers from 1977-1991. Price: $10.00 Quantity :
	Click here for larger image		Featured Item: Heat Riser Dampner GW 1975-1991 This is a quality replacement part.This is the exhaust heat riser dampner that comes with the gasket seal.This will fit all Jeep Grand Wagoneers and Full Size Wagoneers and Cherokees as well as J-10 Trucks with the V8-360 engine from 1975-1991.This attatches to the top of the front pipe. Featured Price: $55.95 Quantity :
	Click here for larger image		Muffler GW 1981-1991 This is a Quality Made in America Muffler. This muffler will fit all Jeep Grand Wagoneers and Wagoneers with the V8-360 engine. Replace that noisy worn out muffler today . Remember that a new muffler will save mileage and perform better than a muffler that is broken aprt on the inside restricting air flow and rusting out allow air to come out. Price: $124.95 Quantity :
	Click here for larger image		PCV Tube This is a factory original part. This is the tube that goes into the intake manifold and attatches to the pcv hose.This tube will fit on all Full Size Jeeps and Grand Wagoneers with a 360 V8 from 1975-1991. Price: $20.00 Quantity :