![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
New Jeep Grand Wagoneer Engine Parts
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Browse through our selection of genuine Jeep Grand Wagoneer parts.
If you need a part but don't see it here, e-mail us at parts@teamgrandwagoneer.com and we'll do our best to locate it for you. Or if you prefer, call us at (262) 658-2268. Order safely and securely: Clicking on the purchase button for any of the parts below will take you to our secure online ordering system. All prices below are quoted in U.S. dollars. Shipping charges are additional. 30-day warranty on parts: Parts must be returned in original package and are subject to a 20% restocking fee. No returns on electrical items. Customer must pay for return shipping. |
||||
|
Pages: [<<] 1 2 3 4 [>>] | ||||
|
|
Click here for larger image
|
|
Main Crankshaft Bearing Set V8 360-401 GW 1971-1991 This is a OMIX BRAND Replacement Crankshaft Main Bearing Set for all V8-360 & 401 Engines. This will fit all Jeep Grand Wagoneers & Full Size Wagoneers-Cherokees-J-10 & J-20 Pick-Up Trucks with a V8-360 & 401 Engine from 1971-1991. This is a Standard Size Set. Oversize Sets Available by Selecting The Correct Option But Are Not In Our Stocking Inventory & May Take Up To An Extra Week To Get. OMIX PART#17465.49 |
|
|
|
||||
|
|
Click here for larger image
|
|
Manifold Choke Tube OEM GW 1974-1991 These Are Factory Original Parts. This Is The Intake Manifold Choke Tube With The Gasket That Is Located & Fits Inside The Manifold & Helps Heat Up The Choke On The Carburetor. This Lower Intake Manifold Choke Tube Is Hidden Inside Of The Intake Manifold As The Plate It Is Attached To Connects The Upper Choke Tubes(which are not included or available anymore) To The Manifold So It Can Use The Engine Heat To Warm Up The Choke Of The Carburetor Itself For Better Cold Starts & Performance. This OE Intake Lower Choke Tube Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks From 1974-1991 With The V8-360 Engine & Automatic Choke On Their Carburetor. The Automatic Choke Was Optional In The Earlier 1974-1980 Model Years But Come Standard On All The Carburetors From 1981-1991 & All Carburetors Installed Afterward For The Most Parts Unless Specifically Specified. These Lower Choke Tubes Tend To Rust Over Time Causing Fumes To Leak Inside The Engine & The Engine To Become Noisier & The Performance To Become Less Efficient Cost Your Jeep Mileage Overall. This Lower Choke Tube Has Been Discontinued & Very Limited. We Will Include The Gasket With This Tube. OE GASKET#53030046 OE TUBE#J3220181 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Mopar Restoration Black Krinkle Finish Aluminum Valve Cover Set GW 1974-1991 NEW LOW PRICE! This is a Mopar Authentic Restoration Product. This Valve Cover Set Comes Complete With Both Black Aluminum Die-Cast Finned Valve Covers & Gaskets with All The Hardware That You Will Need To Install These Covers. This will fit all Jeep Grand Wagoneers & Full Size Cherokees & Wagoneers & Jeep J-10 & J-20 Pick-Up Trucks With A V8-360 OR 401 Engine From 1974-1991. THE VALVE COVERS COMES WITH THE WORD JEEP STAMPED ON EACH COVER. There Is A Limited Warranty On This Item That Shall Be Free Of Any Defects In Material Or Workmanship For 3-Years. WE HAVE THIS MOPAR RESTORATION VALVE COVER SET PRICED TO SELL FOR LESS THAN MOST ANY OTHER JEEP PARTS SUPPLIERS ANYWHERE. GET THIS WHILE YOU CAN AT THIS LOW PRICE!!!!!! PART#DMC-6920 |
|
|
|
||||
|
|
|
|
Oil Filler Tube GW Stainless Steel This is a Stainless Steel Oil Filler Tube. This will look great when you have chrome valve covers or a aluminum intake manifold. Fits right in with no tools needed. Change that old filler tube & give that engine a cleaner new look. OUT OF STOCK |
|
|
|
||||
|
|
Click here for larger image
|
|
Oil Filter Connector OEM GW 1974-1991 This is a Factory Part. This OE Piece Is What Attaches The Oil Pump & Housing To The Oil Filter & This Connector Threads The OIL FILTER Which Screws Onto This Piece. If Your Oil Filter Is Always Leaking Because Your Threads Are Stripped-This Is The Connector Piece That You Will Need To Replace. This Connector May Strip The Threads Over Time & Mileage From Normal Wear & Especially Abusive Wear From Mechanics That May Continuously Over Tighten Your Oil Filter Every Oil Change. This OE Connector Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Full Size Cherokees & Jeep J-10 & J-20 Pick-Up Trucks From 1974-1991. Please Make Sure That Your Thread Size Was The Same Size Because If Yours Was Different-You Will Need To Use The Newer Grand Wagoneer Style Filter As This Thread Is Set For This Style Filter & Should Fit All Full Size Jeeps & Will Install Into The Oil Pump Housing But Please Make Sure The OIL-FILTER SIZE IS STILL THE SAME. THESE ARE BECOMING VERY LIMITED& WE ARE STILL SELLING THIS PART UNDER THE LIST PRICE. OE PART#33003538 |
|
|
|
||||
|
|
|
|
Oil Pan Bolt Set OEM GW 1974-1991 This Is A Complete Set Of Factory Original 14-Piece Oil Pan Bolt Set. This OE Complete Set Of 14-Oil Pan Bolt Sets Is Correct & Will Fit All Jeep Grand Wagoneers & The Jeep J-10 & J-20 Pick Up-Trucks & Full Size Wagoneers & Cherokee & Cherokee Chiefs From 1974-1991 With The V8-360 & 401 Engines. We Also Highly Recommend Purchasing & Replacing The Oil Pan Gasket At The Same Time. WE ALSO RECOMMEND REPLACING THESE OIL PAN BOLTS WHEN CHANGING THE OIL PAN & OR GASKET ESPECIALLY IF THEY HAVE NEVER BEEN REPLACED BEFORE AS THEY BECOME STRIPPED & LOSE TENSION OVER TIME CAUSING LEAKS & FOR THE SMALL PRICE-IT BECOMES WELL WORTH THE PRICE & TIME NOW & EVEN MORE LONG TERM. THIS WILL ONLY BE SOLD AS A 14-PIECE BOLT SET. SAVE OVER THE DEALER LIST PRICE. OEM PART#6034732 |
|
|
|
||||
|
|
Click here for larger image
|
|
Oil Pan Drain Plug GW 1974-1991 This Is An Oil Drain Plug With A Gasket Seal For The Oil Pan On All Jeep Grand Wagoneer & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 Engine From 1974-1991. This Oil Drain Plug & Seal Should Be Changed Regularly Every Other Oil Change To Prevent Stripping Out The Expensive Oil Pan Itself. These Threads Can Easily Be Cross-Threaded When Installing Especially If A Mechanic Is In A Hurry & They Would Not Even Notice Or Possibly Not Even Mention It. This Will Fit On OE Oil Pans As Long As The Plug Has Not Been Stripped Previously & A Larger Self Tapping Plug Was Added. This Will Only Work With Oil Pans That Have Not Had Damaged Threads. That Would Require A New Oil Pan Or A Self Tapping Screw For One More Time Use Until You Replace The Oil Pan. This Is A Direct Replacement Style Oil Drain Plug With A Seal. JEEP WAS CHARGING MORE THAN 3-TIMES THE PRICE FOR A OE PLUG 10 YEARS BACK & THEY NO LONGER CARRY THIS PART ANYMORE. GET THIS FOR YOUR NEXT OIL CHANGE TO PRESERVE THE OIL PAN & SAVE SOME OIL LEAKING. CHANGING THE ALUMINUM DRAIN PLUG SEAL CAN STOP MOST ALL LEAKS FROM THE PLUG WHICH WILL STOP THAT OIL DRIP ON YOUR DRIVEWAY OR GARAGE FLOOR. OE REPLACEMENT PART#J3206696 |
|
|
|
||||
|
|
|
|
Oil Pan Gasket OEM GW 4.2L 1972-1986 This Factory Original Mopar Oil Pan Gasket will fit all Jeep GW, Full Size Jeeps, and J-10 trucks with a 4.2L engine from 1972-1986. This silicone gasket is the OEM part for your Jeep and will perform to all vehicle specs. Replace this gasket if yours has become damaged or corroded and is causing water to leak into your oil pan. Don’t forget about a part as simple as this when you are repairing or rebuilding your GW. OEM PART#53007568 |
|
|
|
||||
|
|
|
|
Featured Item: Oil Pan Gasket Set V8-360-401 GW 1974-1991 This CROWN Brand Direct Replacement Style Oil Pan Gasket Set Includes The 2-Lower Lip Seals Just Like The Factory Original Came With. This Oil Pan Gasket Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Jeep J-10 & J-20 Pick-Up Trucks & Cherokee's With The V8-360 & 401 Engines From 1974-1991. Most Engines Will Leak From The Oil Pan After 100,000 Miles. If Your Oil Is Pan Is Full Of Old Oil & Leaking-Replace The Gasket Now--This Also Lets You Look Inside Your Pan & Clean Out Any Sludge Or Dirt Inside The Pan. It Will Give You An Idea On How Clean Your Engine Really Is. Remember To Change Your Oil Filter At The Same Time. OMIX Gives A Limited 3-Year Warranty On This Gasket For Material Defects Only. Stop That Oil Leak From Ruining Your Driveway Or Even Garage Floor & Replace This Gasket. OEM REPLACEMENT# J3206690 CROWN REPLACEMENT PART#3206690 |
|
|
|
||||
|
|
Click here for larger image
|
|
Oil Pan OEM V8-360-401 GW 1974-1991 This Is A Factory Original Oil Pan. This OE Oil Pan Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Cherokee Chiefs & Also Including The Jeep J-10 & J-20 & J-3000 Pick-Up Trucks With The V8-360 & 401 Engines From 1974-1991. If Your Oil Pans Has Been Damaged From Hitting Something Underneath Or The Oil Pan Is Now Warped & You Can NOT Get Any Gasket To Seal Without Leaking-You Need To Replace Your Oil Pan. This OE Oil Pan Does Not Include The Drain Plug But We Will Offer This OE Oil Pan Alone & With A Drain Plug Added & You Can Also Get The Oil Pan With The Gasket & Drain Plug Included To Save Money & Time As You Will Need These. The Drain Plug & Gasket Will Not Be OE Original As They Have Been Long Discontinued By Jeep. |
|
|
|
||||
|
|
Click here for larger image
|
|
Oil Pan Replacement V8 360-401 GW 1974-1991 This is a Quality Replacement Oil Pan. This Oil Pan comes with the Oil Pan Drain plug. This will fit all Jeep Grand Wagoneers & Full Size Wagoneers & Chgerokee Chiefs & Cherokees & J-10 & J20 Pick-Up Trucks with a V8-360 & 401 Engine from 1974-1991. Gasket could also be purchased with oil pan. See menu below. OE REPLACEMENT #J3236322 |
|
|
|
||||
|
|
|
|
Featured Item: Oil Pick-Up Tube GW 1972-1991 This Is A OMIX Brand Direct Replacement OIL PICK-UP TUBE & SCREEN ASSEMBLY. This Pick-Up Tube can easily be replaced when your oil pan gasket is being done and recommended if your oil was dirty. This will fit all Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks From 1972-1991 with The V8-360 Engine. This OIL PICK UP TUBE & SCREEN ASSEMBLY is the first line of defense in saving your engine in wear & tear. This screen will block engine sludge from getting uo to the piston and valves. If you hear a knocking noise when you first start your engine--this may be picking up too much dirt and may need to be replaced as well as cleaning the oil pan. Omix Gives A Limited 3-Year Warranty For Ant Material Defects On This Oil Pick Up Tube & Screen Assembly. THIS WORKS LIKE AN EXTRA OIL FILTER-SAVE YOUR HI MILEAGE ENGINE WHEN CHANGING YOUR OIL PAN TODAY. #OE REPLACEMENT#J3216049 #OMIX PART#17433.12 |
|
|
|
||||
|
|
|
|
Oil Pump Cover V8-360/401 GW 1974-1991 This Is A OMIX Brand Direct Replacement Oil Pump Cover That Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks From 1974-1991 With a V8-360 & 401 Engine. This is the oil pump housing cover. This Cover is made of Aluminum & Holds the Oil Pump. These will tend to crack or wear out over time causing oil leaks or oil consumption. This will be Next to the Timing Cover & is Included in The Timing Cover Kit Assembly That We Sell on The Web Site. This is a MUST if you are Rebuilding the Oil Pump.This Housing has been newly redesigned for better oil pressure than the older style had. OMIX GIVES A LIMITED 3-YEAR WARRANTY ON THIS OIL PUMP HOUSING COVER. WE HIGHLY RECOMMEND PURCHASING THE OIL PUMP REBUILD KIT WITH GASKETS AT THE SAME TIME AS YOU WILL NEED THE GASKETS AS WELL WHEN CHANGING THIS KIT. OEM REPLACEMENT PART#J3226242 OE REPLACEMENT PART#33003536 OMIX PART#17470.15 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Oil Pump Housing Gasket V8-360/401 GW 1972-1991 This Is A Omix Brand Direct Replacement OE Style Oil Pump Housing Gasket That Is Specifically Designed To Fit The V8-360/401 Engines From 1972-1991. This Oil Pump Housing Gasket Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chief & All Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 & 401 Engines From 1972-1991. Note That This Will Also Fit All AMC 304/360/390/401 Engines From 1966-1991. Omix Made This Oil Pump Housing Gasket TO OE Specifications & Gives A Limited 3-Year Warranty For Defects Only From The Manufacturer On This Gasket. If You Changed The Oil Pump A While Ago & It Is Leaking Oil & Does Not Require Any Work & Or You Were Replacing The Oil Pump & Possibly Rebuilding The Pump & You Damaged The Gasket When Installing It-This Gasket Is Your Cure. Now You Do Not Have To Purchase A Complete Seal Kit For One Gasket. Get It Here & Now At Team Grand Wagoneer. OE OIL PUMP GASKET#J3226241 OMIX OIL PUMP GASKET#17439.12 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Oil Pump Pick-Up Screen Assembly 4.2 Liter GW 1981-1990 This Is A Omix Brand Direct Replacement Oil Pump Pick-Up Screen Assembly. This Direct Fit Oil Pump Screen Pick-Up Is Made To OE Specifications & Comes With A Limited 3-Year Warranty Through Omix From Any Material Defects From The Manufacturer. This Oil Pump Pick-Up Screen Assembly Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks With The 4.2 Liter Engine From 1981-1990. If Your Engine Has Sludge In The Oil Pan Or You Suspect Excessive Dirt In The Bottom Of Your Oil Pan-You MAY WANT TO REPLACE THIS OIL SCREEN. Any Time That You Replace The Oil Pan For Any Reason-We Highly RECOMMEND You Inspect & Or Replace This Oil Screen At The Same Time As It Will Allow The Oil To Pass Easier If You Have A New Clean Screen To Filter Out Your Oil Especially If You Suspect Lower Oil Pressure. Any Time You Do Internal Engine Work & The Oil Pan-Replacing This Screen Is A MUST!! OE REPLACEMENT PART#J3212140 OMIX PART#17433.08 |
|
|
|
||||
|
|
Click here for larger image
|
|
Oil Pump Rebuild Kit V8-360/401GW 1971-1991 This OMIX Brand Oil Pump Rebuild Kit Is What Comes Inside The Housing & Includes All The Needed Parts Such As The Pressure Springs & Oil Pump Gears to Build Pressure & The Base Gasket. This Oil Pump Rebuild Kit Will Fit all Jeep Grand Wagoneers & Full Size Wagoneers & Full Size Cherokees & J-10 & J-20 Pick-Up Trucks Including Cherokee Chiefs From 1971-1991 With The V8-360 & 401 Engines & Also The 304-CJ Engine If Someone Swapped The Engine Out From Another Jeep At One Time. If You Have Low Oil Pressure Or No Oil Pressure At All-This Is Most Likely The PROBLEM! OMIX MADE THIS PART FROM THE MANUFACTURERS SPECIFICATIONS & OFFERS A 3-YEAR LIMITED WARRANTY ON DEFECTS ONLY FOR THIS OIL PUMP REBUILD KIT WHICH IS THE BEST IN THE INDUSTRY. IF YOU NEED THIS KIT--OMIX IS THE WAY TO GO--GET IT HERE NOW--AS IT'S PRICED TO SELL TODAY. OE ORIGINAL PART#J3184086 OMIX PART#17433.11 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Oil Pump W/Oil Pick-Up Screen Assembly 4.2 Liter GW 1981-1990 This Is A Direct Replacement OE Style Oil Pump & Gasket Assembly With The Oil Screen Pick-Up Tube. This Direct Fit Oil Pump Assembly Is Made To OE Specifications & Comes With A Limited 3-Year Warranty From Any Material Defects Through The Manufacturer From Omix. This Oil Pump & Gasket Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks With The 4.2 Liter Engine From 1981-1990. If Your Engine Has Exceeded Over 100,000 Miles & The Oil Dip Stick Seems Very Black & The Oil Pressure Seems A Little Lower Than It Used To Be-The Oil Pan May Have Some Residual Sludge Build Up Over Time Causing The Oil-Pick Up Screen To Be Clogging Up At Times Making The Oil Pump Work Extra Hard & Then Causing Excessive Wear Over Time Allowing The Tolerances On The Oil Pump To Still Work BUT At Lower Pressures Which Can Endanger Your Engine. If You See Signs Of Oil Psi Getting Low-The Pump & Or The Pick-Up Screen May Be The Problem-ESPECIALLY If You Are Not The Original Owner Of The High Mileage Jeep & Can Not Account For All The Oil Changes To Be Done On Time For The Life Of Your Jeep. If You Are Doing Any Type Of Internal Engine Work-WE HIGHLY RECOMMEND ALWAYS CHANGING THE OIL PUMP AT THE SAME TIME TO ENSURE PROPER PRESSURE ON YOUR NEW ENGINE PARTS!! We Also Recommend Amsoil Synthetic Break-In Oil & Engine Oil If You Are Doing Any Engine Work. We Sell Amsoil On This Web Site-See The AMSOIL Section For Details. This Oil Pump Automatically Come With The Gasket & Can Be Purchased With Or Without The Oil Pick-Up Screen. Save Money When Purchasing This Together. OE OIL PUMP PART#J3242141 OMIX OIL PUMP W/SCREEN#17433.09 OMIX OIL PUMP ALONE#17433.03 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: PAIR DIECAST POLISHED ALUMINUM FINNED VALVE COVERS V8 360-401 GW 1974-1991 Classic Aluminum Valve Covers for AMC V8 engines! These valve covers are Diecast from High-Quality 383-3 Aluminum Alloy, and then given a high luster polished aluminum finish. Will fit all GW and J-10 trucks from 1974-1991 with the 360 & 401 engines. The finned valve covers help dissipate heat, and dress up any engine compartment. NEW LOWER PRICE RUGGED RIDGE PART #17401.12 |
|
|
|
||||
|
|
Click here for larger image
|
|
Piston Ring Set GW 1971-1991 These Are A Direct Replacement OE Style Premium Brand Sponsored Through Omix Set Of Complete Piston Rings For All 8-Cylinders As A Complete Set For A V8-360 AMC-Jeep Engine. This Direct Fit Piston Ring Kit Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Jeep Wagoneers & Cherokees Including The Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 Engine From 1971-1991. This Kit Will Also Work On The AMC AMX & JAVELINS From 1971-1974 As Well. We Are Offering This Complete Piston Ring Kit In The Standard Size Piston Rings As Well As 0.10-0.20-0.30 OVERSIZED Piston Rings. PLEASE CHOOSE THE COMPLETE PISTON RING SET IN THE SIZE THAT YOU NEED. OMIX GIVES YOU A LIMITED 3-YEAR WARRANTY THROUGH THE MANUFACTURER FROM ANY MATERIAL DEFECTS. WE ALSO SELL THE PISTONS THAT YOU NEED ON THE WEB SITE AS WELL. CALL IF YOU NEED A SIZE NOT SHOWN. STANDARD RINGS#17430.31 .010 RINGS#17430.32 .020 RINGS#17430.33 .030 RINGS#17340.34 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Prothane Drivetrain Mount Kit GW V8 1972-1991 This Is A Poly-Urethane Drive-Train Set That Includes V8-Engines Mounts & All Needed Hardware & The Transmission Mount With All The Needed Hardware & The Transfer Case Torque Stud Grommets & Stud For The Transfer Case All Made By PROTHANE™ Here In The U.S.A.. This Very Specialized Set Was Made Just For Team Grand Wagoneer & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Full Size Cherokees Including The Cherokee Chief Model As Well As The Jeep J-10 & J-20 Pick-Up Trucks With The-V8 360 & 401 Engines From 1972-1991. Purchasing This Kit As A Complete Set Will Save You Some EXTRA MONEY Than If You Bought Each Piece Separately. These Superior Poly-Urethane Mounts & Grommets Are Made To Handle The Elements & Oil Leaks & So They Will Never Break Down Unlike The Stock Rubber Mounts & With PROTHANES™ Special Run-Safe Interlock™ Design-These Mounts Will Never Leave You Stranded Out Or Off-Road. You Can Purchase This Kit In The BLACK As Shown In The Picture Or In RED Poly-Urethane Colors. NEW LOWER PRICE ON THIS KIT!!! BEST PRICE ON THIS KIT ANYWHERE!!!!!!!!!!!! PROTHANE™ PARTS INCLUDED IN THE SET#1-503-7-1604-1-1201 PLUS T-CASE STUD FROM OMIX. CHECK FOR ALL OUR OTHER PROTHANE ITEMS ON THE WEB SITE FOR ALL YOUR FULL SIZE JEEPS OR ANY JEEP.IF YOU NEED PROTHANE FOR ANY OTHER CAR OR SUV-JUST CALL US-AS WE ARE A PROTHANE AUTHORIZED DEALER. |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Prothane Engine Motor Mount Set V8-360/401 GW 1972-1991 This is a HI-Performance Poly-Urethane Motor Mount Set Made From Prothane™ Here In The U.S.A.. This Engine Mount Kit Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Full Size Cherokees & Cherokee Chiefs & Also The Jeep J-10 & J-20 Pick-Up Trucks From 1972-1991 With The V8 360 & 401 Engines. These V8 Poly-Urethane Engine Mounts Come Complete With All The Necessary Locking Nuts & Hardware. These PROTHANE™ Poly-Urethane Engine Mounts Are A Must With Anyone That Has A HI-Performance & HI Horsepower Engine.The Unique Mount Design Will Prevent The Mount From EVER BREAKING APART EVEN IF FOR ANY REASON-IF POSSIBLE THE POLY-URETHANE CAME APART WHICH IS BACKED BY A LIMITED LIFETIME WARRANTY THROUGH PROTHANE™ These Engine Mounts Are Sold In A Black Or Red Poly-Urethane Color So Choose The Colors Set Of Mounts You Prefer Below When Purchasing These. THESE ENGINE MOUNTS ARE INCLUDED IN THE DRIVE-TRAIN KIT & IN THE PROTHANE™ MASTER KIT ON THE WEB SITE. NEW UNBEATABLE LOWER PRICE!!! PROTHANE™ MOUNT# 1-503 |
|
|
|
||||
|
|
|
|
Featured Item: Prothane Engine Mount Set 4.2 Liter GW 1974-1989 This Is A Complete Set Of Poly-Urethane Engine Mounts Made Here In The USA By Prothane ™ Specifically For The 4.2 Liter Engine. This Set Of Motor Mounts Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & The Jeep J-10 & J-20 Pick-Up Trucks With The 4.2 Liter 6-Cylinder Engine From 1974-1989. If You Are Hearing Clunking Noises From Your Engine When You Put It In Gear-Your Rubber Original Mounts Might Be Cracked. These Poly-Urethane Run-Stop ™ Motor Mounts Are Made From Full Metal Mounts & Then Enclosed With Poly-Urethane Making Them Superior To Just Rubber Mounts & Able To Outperform & Withstand High Horsepower & Torque. Oil Spilling On Rubber Mounts Wears Them Down & When They Dry Out Crack & These Motor Mounts Are Guaranteed For Life Through Prothane. These Come IN 2-Different Colors Which Are Red & Black. Please Choose The Color You Prefer. PROTHANE MOTOR MOUNT SET#1-501 |
|
|
|
||||
|
|
Click here for larger image
|
|
Push-Rods V8-360/401 GW 1972-1991 This Set Of OMIX Brand Push-Rods Was Mad To The Original Manufacturer Specifications To Ensure Proper Performance & Fit. Omix Has A 3-Year Limited Warranty For Defects Only On The Push-Rods. These Push-Rods Were Designed For A Direct Fit On All Jeep Grand Wagoneer & Full Size Wagoneers & Cherokees & J-10 & J-20 Pick-Up Trucks With The V8-360 & 401 Engines From 1972-1991. These Are Sold Only As A Complete Set Of 16 Push-Rods. We Recommend This Set When Replacing Your Hydraulic Lifters As These Push-Rods May Be Bent Even Though You May Not Be Able To Tell By Looking At Them Without Taking Measurements.These Push-Rods Should Always Be Replaced On Every Engine Overhaul Or Valve Job. PURCHASE THEM NOW WITH OUR NEW LOWER PRICE. OE REPLACEMENT PART#J3214014 OMIX PART#17410.06 |
|
|
|
||||
|
|
Click here for larger image
|
|
Rear Main Crankshaft Oil Seal 4.2 Liter GW 1972-1988 This Omix Brand Rear Main Crankshaft Oil Seal Is What Connects To The Top Lip Of The Rear Oil Pan & The Rear Of The Crankshaft & Prevents Engine Oil From Leaking Out Of Your Engine. This Oil Seal Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers While Also Fitting The Jeep J-10 & J-20 Pick-Up Trucks From 1972-1988 With The 4.2 Liter 258 Cubic Inch Engine. If You Are Leaking Engine Oil From The Rear Of Your Engine & It Is In Front Of Your Transmission But You Can Not See Where It Is Leaking From- THIS IS THE MOST LIKELY SPOT YOUR LEAK IS COMING FROM.THIS SEAL IS A LITTLE HARDER THAN MOST TO CHANGE SO MAKE SURE THIS IS SOMETHING YOU CAN DO BEFORE PURCHASING-HOWEVER IT IS ONLY A 3-4 HOUR JOB & ONCE DONE-MAY NEVER HAVE TO BE DONE AGAIN & YOUR GARAGE OR DRIVEWAY WILL NOT HAVE TO SEE THOSE OIL SPOTS AGAIN. WE HIGHLY RECOMMEND YOU CHANGE YOU OIL PAN GASKET & CHANGE YOUR OIL & FILTER AT THE SAME TIME AS THE OIL PAN MUST BE REMOVED WHEN DOING THIS JOB. WE ALSO RECOMMEND YOU PURCHASE SOME AMSOIL SYNTHETIC 10W40 ENGINE OIL W/ZINC ADDITIVE ALREADY INSIDE BECAUSE THIS ENGINE RUNS MUCH BETTER WITH THE ZINC INSIDE NOT TO MENTION SYNTHETIC OIL DOES NOT BREAK DOWN & RUNS COOLER. OMIX ALSO HAS A LIMITED 3-YEAR WARRANTY FOR DEFECTS ONLY ON ALL THEIR PARTS WHICH IS ONE OF THE BEST IN THE INDUSTRY. REAR MAIN CRANK SEAL PART# OE REPLACEMENT PART#J3205331 OMIX PART#17458.03 |
|
|
|
||||
|
|
Click here for larger image
|
|
Rear Main Crankshaft Oil Seal V8-360/401 GW 1974-1991 This Omix Brand Rear Main Oil Crankshaft Seal Is What Connects To The Top Lip Of The Rear Oil Pan & The Rear Of The Crankshaft & Prevents Engine Oil From Leaking Out Of Your Engine. This Oil Seal Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chief While Also Fitting The Jeep J-10 & J-20 Pick-Up Trucks From 1971-1991 With The V8-360 & 401 Engines. If You Are Leaking Engine Oil From The Rear Of Your Engine & It Is In Front Of Your Transmission But You Can Not See Where It Is Leaking From- THIS IS THE MOST LIKELY SPOT YOUR LEAK IS COMING FROM.THIS SEAL IS A LITTLE HARDER THAN MOST TO CHANGE SO MAKE SURE THIS IS SOMETHING YOU CAN DO BEFORE PURCHASING-HOWEVER IT IS ONLY A 3-4 HOUR JOB & ONCE DONE-MAY NEVER HAVE TO BE DONE AGAIN & YOUR GARAGE OR DRIVEWAY WILL NOT HAVE TO SEE THOSE OIL SPOTS AGAIN. WE HIGHLY RECOMMEND YOU CHANGE YOU OIL PAN GASKET & CHANGE YOUR OIL & FILTER AT THE SAME TIME AS THE OIL PAN MUST BE REMOVED WHEN DOING THIS JOB. WE ALSO RECOMMEND YOU PURCHASE SOME AMSOIL SYNTHETIC 10W40 ENGINE OIL W/ZINC ADDITIVE ALREADY INSIDE BECAUSE THIS ENGINE RUNS MUCH BETTER WITH THE ZINC INSIDE NOT TO MENTION SYNTHETIC OIL DOES NOT BREAK DOWN & RUNS COOLER. REAR MAIN CRANK SEAL PART# OE REPLACEMENT PART#J3206691 OMIX PART#17458.04 |
|
|
|
||||
|
Pages: [<<] 1 2 3 4 [>>] | ||||