New Jeep Grand Wagoneer Emission Parts

	Browse through our selection of genuine Jeep Grand Wagoneer parts. If you need a part but don't see it here, e-mail us at parts@teamgrandwagoneer.com and we'll do our best to locate it for you. Or if you prefer, call us at (262) 658-2268. Order safely and securely: Clicking on the purchase button for any of the parts below will take you to our secure online ordering system. All prices below are quoted in U.S. dollars. Shipping charges are additional. 30-day warranty on parts: Parts must be returned in original package and are subject to a 20% restocking fee. No returns on electrical items. Customer must pay for return shipping.
	Pages: [<<] 1 2
	Click here for larger image		Exhaust Manifold Mounting Bolts This is a set of factory replacement grade 5 bolt set.These bolts are for mounting the exhaust manifolds for a V8-360 Jeep engine.They will wit all Jeep Grand Wagoneers and Full Size Jeeps from 1975-1991 with the V8-360 engine.Acomplete set of 8 mounting bolts. Does not include bolt tubes for air pipes. Price: $10.00 Quantity :
	Click here for larger image		Exhaust Manifold Plug Set GW 1974-1991 This is a plug set. This set is made to plug the holes on the exhaust manifold where ther air pipe is supposed to be installed on Grand Wagoneers -Full Size Jeeps and Wagoneers and Cherokees with the V8-360 engine from 1974-1991.We only recommend you plug your manifold in non emmision states.This will come as a complete set of 6 plugs. Price: $4.95 Quantity :
	Click here for larger image		Exhaust Manifold Set GW 1981-1991 This set includes both side exhaust manifolds with gaskets. It will fit all V8-360 Jeep Grand Wagoneers and Full Size Wagoneers from 1981-1991.Note that the passenger side manifold comes with the shield attatched for the cold air intake hose. This is how it was from the factory to get warm air to warm up the carburetor. Price: $395.00 Quantity :
	Click here for larger image		Fuel Tank Vent Valve & Grommet GW 1981-1991 These are factory original parts. This is the vent on top of the fuel tank that allows the fuel tank to vent to the vapor cannister.This valve allows the fumes to go into the vapor cannister. The fuel vent valve and grommet seal are correct for a Jeep Grand Wagoneer from 1981-1991. Each fuel tank requires 2 of these items. This will be sold as individual valve with grommet together or seperately for those who do not want to change both pieces at the same time. We recommend replacing both valves and grommets together. A bad valve will contribute to poor emmissions causing excessive HC levels. If the valves are bad upon replacing, we also recommend replacing the cannister filter at the same time. VERY LIMITED-ONE COMPLETE SET LEFT-THIS IS DISCONTINUED FROM JEEP. Price: $9.00 1 Grommet - $9.001 Vent Valve - $21.951 Grommet & Vent Valve - $31.50Complete 4 Piece Set - $61.95 Quantity :
	Click here for larger image		Featured Item: Heat Riser Dampner GW 1975-1991 This is a quality replacement part.This is the exhaust heat riser dampner that comes with the gasket seal.This will fit all Jeep Grand Wagoneers and Full Size Wagoneers and Cherokees as well as J-10 Trucks with the V8-360 engine from 1975-1991.This attatches to the top of the front pipe. Featured Price: $55.95 Quantity :
	Click here for larger image		Manifold Choke Tube This is a factory original part.This is the intake manifold choke tube with gasket that fits inside the manifold and helps heat up the choke on the carb.This lower tube assembly is hidden inside the manifold as the plate connects the upper tubes to the manifold to warm up the choke of the carb for better cold starts.This will fit all Jeep Grand Wagoneers and Full Size Jeeps and Wagoneers from 1974-1991 with a V8-360 engine and automatic choke.This kit also includes 2 factory mounting bolts not shown in picture. Price: $26.95 Quantity :
	Click here for larger image		PCV Valve OEM GW 1979-1991 This is factory original part. This part will fit all Grand Wagoneers and Full Size Jeeps with 360 V8 engine from 1979-1991.This PCV should be replaced every 15,000 miles especially on engines with high mileage to help the breathe easier. Price: $5.95 Quantity :
	Click here for larger image		PCV Hose GW 1980-1991 This is a original factory molded pcv hose. This will fit all Jeep Grand Wagoneers with a 360 V8 from 1980-1991. These are very limited and the pre-molded shape prevents from hose to kink. Price: $16.95 Quantity :
	Click here for larger image		PCV Tube This is a factory original part. This is the tube that goes into the intake manifold and attatches to the pcv hose.This tube will fit on all Full Size Jeeps and Grand Wagoneers with a 360 V8 from 1975-1991. Price: $20.00 Quantity :
	Click here for larger image		Pulse Air Tube Assemblies GW 1983-1986 These are replacement pulse air upstream and downstream tube assemblies with check valve.This set includes the front pipe upstream tube assembly and the catalytic convertor downstream tube assembly with or without check valves.This will fit all Jeep Grand Wagoneers and J-Trucks with the 258 six cylinder engine from 1983-1986.We reproduced these pipes to save you 65% under dealer price.These pipes come with or without check valves. Price: $84.95 Air Tubes Complete W/Check Valves - $84.95Air Tubes Only - $62.95 Quantity :
	Click here for larger image		Reverse Delay Valve Blue/White This is a factory original reverse delay valve.This valve is blue/white and is for the emmissions on either a Jeep Grand Wagoneer-J-Trucks with a V8-360 engine from 1986-1991. Price: $8.00 Quantity :
	Click here for larger image		Sensor Intake Air Temperature This is a factory original part.This emmission part is located on the air cleaner and works with a delay valve.This will fit all Jeep Grand Wagoneer and J-10 & J-20 Trucks with a V8 engine from 1986-1991.
	Click here for larger image		Smog Air Pump GW 1973-1991 This is an emission smog air pump for V8 360 Jeep Grand Wagoneers from 1984-1988 and Wagoneers from 1973-1983 Price: $84.95 Quantity :
	Click here for larger image		Smog Air Pump Pulley This is a factory OEM original part.This is a smog pump pulley.This will fit all Jeep Grand Wagoneers and Full Size Jeeps and J-Trucks with the V8-360 engine from 1976-1991.Some models will require to drill the bolt holes 2 mm larger for the bolts to fit thru but will fit all models as this is a factory part. Price: $44.95 Quantity :
	Click here for larger image		Smog Pump Adjusting Bracket Bolt Set GW 1974-1991 These are factory original bolts. These are the 2 bolts that go inside the smog air pump adjusting bracket.These are the bolts that adjust the tightness of the smog pump.These will fit all Jeep Grand Wagoneers and Full Size Wagoneers and J-10 Truck with the V8-360 engine from 1974-1991.This will only be sold as a set. Price: $4.95 Quantity :
	Click here for larger image		Smog Pump Adjusting Bracket GW 1976-1991 This is a factory original part. This is the bracket that adjusts the tightness of the smog pump when installing the belt.This will fit all Jeep Grand Wagoneers and Full Size Jeeps and J-10 Trucks with the V8-360 engine from 1976-1991. Price: $4.50 Quantity :
	Click here for larger image		Smog Pump Bracket GW 1976-1991 This is a factory original bracket. This OEM smog pump bracket is designed to keep the smog pump in place.This will fit all Jeep Grand Wagoneers and Full Size Wagoneers and Cherokees as well as J-10 Trucks with the V8-360 engine from 1976-1991.OUT OF STOCK
	Click here for larger image		Smog Pump Pulley Bolt Set 8 m.m. 1974-1991 These are factory original screws. This is a set of 3 8 milimeter screws for smog pumps.This will fit all Jeep Grand Wagoneers and Full Size Jeeps with the V8-360 engine from 1974-1991 with a smog pump.Note that some early model years before 1987 that you may have to drill the hole slightly larger to make these fit. Price: $10.95 Quantity :
	Click here for larger image		Solenoid Valve GW 1983-1991 This is a factory original part. This emmission solenoid valve connects to a vacuum line that goes into the carburator. It will fit all V8-360 engines in all Jeep Grand Wagoneers and J-Trucks from 1983-1991. Price: $44.95 Quantity :
	Click here for larger image		Switch Dual Function GW This is a factory original emmission part.This will fit all Jeep Grand Wagoneers from 1984-1991 with a V8-360 engine.This switch is mounted on the rear of the intake manifold. Price: $42.95 Quantity :
	Click here for larger image		Switch EGR -CTO Black This is a factory original part.This switch works with your egr valve.This will fit all Jeep Grand Wagoneers and J-Trucks from 1982-1991 with V8-360 engines. Price: $37.95 Quantity :
	Click here for larger image		Switch HDC-CTO Red Thermostat This is a factory original N.O.S. emmission switch. This switch will fit all Jeep Grand Wagoneers and Full Size Jeeps from 1974-1991 with V8-360 engines.This part is located on the thermostat.These are very limited.CALL FOR DETAILS.
	Click here for larger image		Switch Spark-CTO Yellow This is a factory original emmission part.This part will fit all Jeep Grand Wagoneers from 1982-1991 with V8-360 engines. Price: $37.95 Quantity :
	Pages: [<<] 1 2