![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
New Jeep Grand Wagoneer Emission Parts
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Browse through our selection of genuine Jeep Grand Wagoneer parts.
If you need a part but don't see it here, e-mail us at parts@teamgrandwagoneer.com and we'll do our best to locate it for you. Or if you prefer, call us at (262) 658-2268. Order safely and securely: Clicking on the purchase button for any of the parts below will take you to our secure online ordering system. All prices below are quoted in U.S. dollars. Shipping charges are additional. 30-day warranty on parts: Parts must be returned in original package and are subject to a 20% restocking fee. No returns on electrical items. Customer must pay for return shipping. |
||||
|
Pages: 1 2 [>>] | ||||
|
|
Click here for larger image
|
|
Air Cleaner Check Valve Black/White OEM GW 1974-1991 This Is A Factory Original N.O.S Air Cleaner Check Valve. This Black/White Check Valve Plugs Into The Air Cleaner To Allow Vacuum To Get Inside The Air Intake Sensor When Needed. Each Air Cleaner Has 2-Of These Black/White Check Valves Going To The Air Cleaners. This Black/White Air Cleaner Check Valve Will Fit All Jeep Grand Wagoneers-Full Size Wagoneers & Cherokees & Cherokee Chiefs & Also Jeep J-10 & J-20 Pick-Up Trucks From 1974-1991. THESE WILL BE SOLD AS EACH OR AS A PAIR & SAVE SOME MONEY. JEEP HAS DISCONTINUED THIS PART & HAS RUN OUT OF THESE CHECK VALVE COMPLETELY. WE STILL HAVE A FEW DOZEN LEFT & THEN THERE WILL NOT BE ANY LEFT ANYWHERE. GET THIS WHILE YOU CAN. OE PART#J3228426 |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Cleaner Flap Gray/Clear Yellow Check Valve OEM GW 1980-1991 This Is A Factory Original N.O.S. Emission Part. This OE Emission Valve Opens The End Flap On The Air Cleaner. This Check Valve Opens The Air Cleaner Flap After The Engine Has Warmed Up To A Certain Temperature To Allow More Fresh Air When Needed Most But Keeps The Flap Closed Still Keeping Warm Air In When Your Carburetor Is Cold To Allow It To Warm Up Quicker For Better Performance & Mileage. This Gray/Clear Yellow Check Valve Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Jeep J-10 & J-20 Pick-Up Trucks From 1980-1991 This Check Valve Is Gray/Clear Yellow In Color & Will Only Take A Minute Or Two For Installation. Please Make Sure That Your Vacuum Hose Is Soft & Not Dry & Brittle When Installing So That You Have Proper Vacuum At All Times. THESE ARE VERY LIMITED FROM JEEP & YOU MAY WANT TO GET THIS VALVE NOW WHILE YOU CAN. OE PART#J3235938 |
|
|
|
||||
|
|
|
|
Air Cleaner Pre-Heater Tube Complete Kit GW 1979-1991 This Is A Quality Made Pre-Heater Tube Kit That Mounts Into The Passenger Side Manifold When The Sheet Metal Holder RUSTS Apart. With this kit-it will allow you to install the cold air pre heater tube to the Manifold WITHOUT Drilling or Replacing the Expensive Exhaust Manifold. The spring mounts over the manifold and with the adapter-it allows you to place the tube inside and warm up the Carburetor as needed. This Pre-Heat Tube Kit Will Fit On All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 Engine From 1974-1991. THIS PRE-HEATER TUBE KIT IS NOW DISCONTINUED & NO LONGER AVAILABLE. WE HAVE LESS THAN A DOZEN KITS AVAILABLE. WE DO SELL THE TUBE SEPARATELY ON THIS WEB SITE HOWEVER THIS KIT TO MOUNT IT WILL NOT BE AVAILABLE. OUT OF STOCK!!!!! |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Cleaner Pre-Heater Tube GW 1979-1991 This Is A Quality Made Air Cleaner Pre-Heater Tube. This Air Cleaner Pre-Heat Tube Is The Correct Size & Will Fit On All V8-360 Engines On Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks From 1979-1991. The picture is shown in its shipping form and can be stretched to the proper length. This hose is sized specifically for your Jeep. |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Air Cleaner Thermal Vacuum Switch 4.2 Liter GW 1980-1988 This Is A OE Style Direct Replacement Thermal Ported Vacuum Switch That Is Located On The Side Of The Air Cleaner Assembly Which Hooks Up Into Your Emission Vacuum Harness On A 4.2 Liter Engine. This Air Cleaner Thermal Vacuum Switch Is Specifically Designed & Correct For All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Jeep J-10 & J-20 Pick-up Trucks From 1980-1988.This Thermal Vacuum Switch Works Off The Temperature Of The Intake Manifold & Then Opens The Flap Of The Air Cleaner Once Warmed Up To Allow Fresh Air To Be Forced In To Get Better Mileage & Performance Once The Engine Is Properly Warmed Up. This Thermal Vacuum Switch Is The Same Or Better Than The OE Switch & For 50% Of The Dealer List Price With The Same 12-Month Warranty. OE REPLACEMENT PART#J3237457 |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Cleaner Thermal Vacuum Switch OEM GW 1979-1991 This is a Factory Original Emission Part. This is a Light Blue Switch That Attaches To The Side Of The Air Cleaner & Has 2 Hose Attachments That Work When The Engine Is Warm. This Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Jeep J-10 & J-20 Pick-Up Trucks With The V8 360 & 401 Engines From 1979-1991. THIS PART IS DISCONTINUED FROM JEEP & WE ONLY HAVE A FEW LEFT. GET THEM WHILE YOU CAN JEEP OEM # J3235329 |
|
|
|
||||
|
|
|
|
Air Cleaner Vacuum Tee GW 1974-1991 This is a Factory Original Vacuum Tee.This OEM Vacuum Tee Attaches to the Harness at the Air Cleaner Connecting The YELLOW/WHITE REVERSE DELAY VALVE & GRAY/WHITE & WHITE/BLACK Delay Valves. This will fit all Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees as well as J-10 & J-20 Pick-Up Trucks From 1974-1991 with the V8-360 Engine as well as the Six Cylinder-258 4.2 Liter Engine. YOU WILL ONLY NEED ONE OF THESE VACUUM TEES FOR YOUR FULL SIZE JEEP. THESE ARE BECOMING VERY LIMITED FROM JEEP BUT WE ARE STILL SELLING THIS PART FOR LESS THAN THE DEALER LIST PRICE. OEM PART#J3210891 |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Injection Hose Clamps V8-360 GW 1974-1991 These STAINLESS STEEL AIR INJECTION HOSE CLAMPS are Specifically Designed with a smooth inside not to damage any Rubber or Silicone Hoses when tightened. This is the Correct size for Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Jeep J-10 & J-20 Pick-Up Trucks From 1974-1991 With The Air Injection Manifold Pipes & The V8-360 Engine. You will Need 10-Clamps To Replace Those Brittle Plastic Clamps That Are Holding The Air Hoses You Have Now Or If You Want To Purchase Our Blue Silicone Hose To Make Your Own Size Replacement HIGH-HEAT HOSES In Its Place. These Will Be Sold As Each Clamp BUT SAVE MONEY & GET THE COMPLETE SET OF 10 CLAMPS. THESE DURABLE STAINLESS STEEL CLAMPS ARE ABOUT 50% OF THE PRICE OF THE OE PLASTIC CLAMPS & WILL LAST A LONG TIME. |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Injection Manifold Complete Hose Set GW This HI-TEMP SILICONE HOSE is for the AIR INJECTION PIPE SYSTEM SET. This is enough Hose to replace all 5 Pieces going to your air injection system. This hose is made of a hi temperature silicone to prevent hose from melting and to stay flexible but not kink.The hoses that go from your divertor valve and air pump tend to become brittle. This is enough hose to cut and replace all the hoses for you air injection system. This will fit all Jeep Grand Wagoneers & Full Size Jeeps with V8-360 engines from 1979-1991. We also Recommend that you purchase the 10 Stainless Steel Smooth Inside Clamps to go with this hose set to Prevent the Hose From Getting Damaged When Tightening & in Hi Heat Areas. |
|
|
|
||||
|
|
|
|
Featured Item: Air Injection Manifold Pipe 4.2 Liter GW 1981-1984 This Air Injection Manifold Pipe Was Made Specifically For Team Grand Wagoneer. This Air Injection Pipe Will Replace Factory Original Air Injection Manifold Pipe #J3238936 OR #J3240558 . This Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Jeep J-10 & J-20 Trucks From 1981-1984 With The 4.2 Liter Engine. These Pipe Commonly Rust Out Causing Carbon Monoxide To Come Inside The Inside Of The Passenger Compartment Through Your Vents. Not To Mention That Your Emissions Will Be TOO HIGH & NOT PASS.These Reasons Plus The Noisey Pipe & Lack Of Performance & Mileage May Be The Reason You Will Want To Just Get It Changed Right Away. We Will Sell This Pipe With Or Without The Check Valve. The Dealer Was Selling This Pipe Recently For Over $250.00 Just Before They Discontinued & Ran Out Of Them. WE ARE SELLING THIS PIPE FOR A DEAL-NOT TO MENTION THE CHECK VALVE FOR A GREAT PRICE IF YOU NEED THAT TOO. |
|
|
|
||||
|
|
|
|
Featured Item: Air Injection Manifold Pipe Bolt Tube Gasket Seal Set V8-360 GW 1974-1991 This Is A Complete 14-Piece Set Of Air Injection Manifold Pipe Bolt Tube Gasket Seals That Fits All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chief & Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 & 401 Engines From 1974-1991. These Air Pipe Bolt Tube Gasket Seals Tend To Leak Over Time & If Your Pipes Are Good & Only Need The Seals To Stop An Air Leak-Why Spend The Money To Replace The Pipes With The Seals If The Gasket Seals Are The Only Problem. These Are Only Being Sold As A Complete 14-Pc. Set. JEEP CHARGES 4-TIMES WHAT WE ARE SELLING THESE GASKETS SEALS AT WHICH IS 75% HIGHER THAN WHAT THE PRICE WE ARE SELLING FOR. IF YOU NEED THESE-GET THEM HERE. OE PART#J0044042 |
|
|
|
||||
|
|
|
|
Air Injection Manifold Pipe Set GW 1974-1991 These Air Direct Replacement OE Style Injection Manifold Pipes Made Specifically For Team Grand Wagoneer To Fit Your V8-360 & 401 AMC Engines. This Air Injection Pipe Set Comes with the Driver-side & Passenger-side Pipes & Washers for Each of the bolt holes. This Set will fit all Jeep Grand Wagoneers & Full Size Wagoneers & J-10 & J-20 Pick-Up Trucks & Full Size Cherokees & Cherokee Chiefs With The V8-360 & 401 Engine From 1974-1991. We Also Sell The Air Injection Manifold Hose Set & Bolts To Go Along With These Air Pipes & Check Valves Which Keep The Hot Air From Coming Up Backwards From The Air Injection Pipes Back Towards The Air Pump On This Page. These Air Injection Manifold Pipes Help Cool The Exhaust Manifold & Keep Emissions Lower Which Overall Help Keep The Engine Temperature Lower & Helps Your Engine Run A Little More Efficient. If you have any questions about installing or what you need-please feel free to call our experts on emissions. YOU CAN BUY THEM AS EACH OR AS A PAIR & SAVE. WE HAVE THE LOWEST PRICES ANYWHERE ON THESE AIR INJECTION PIPES. GET THEM AT TEAM GRAND WAGONEER. OE REPLACEMENT PART# DRIVER SIDE#J3234691 PASSENGER SIDE#J3234692 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Air Injection Pipe Bolt 4.2 Liter OEM GW 1978-1986 These Are Factory Original Air Injection Manifold Hollow Tube Bolts That Go Through The Holes Of The Air Injection Manifold Pipe That Allows Pumped Air From The Air Pump To Cool Off The Exhaust Manifold To Run Cleaner & More Efficient. These Air Injection Pipe Bolts Are Very Specific To This Engine & Have Been Discontinued From Jeep & Are No Longer Available As Jeep Has Run Out Of These Bolts. WE HAVE A VERY LIMITED SUPPLY & WILL ONLY BE SELLING THESE AS A COMPLETE 6-PIECE BOLT SET. GET THEM WHILE THEY LAST-THEY WILL NOT BE AVAILABLE LONG. OEM PART#J3229457 |
|
|
|
||||
|
|
|
|
Air Injection Pipe Bolt OEM GW 1972-1991 This Is A Factory Original Air Injection Manifold Pipe Bolt That Is Hollow On The Inside That Allows Air That Is Pumped From The Air Or Smog Pump Which Then Passes Through The Divertor Valve & Then Goes Through The Air Injection Manifold Pipes Through A Set Of 6-Of These Hardened Hollow Bolts To Cool Down The Exhaust Manifold To Keep The HC Levels Lower For Emissions & To Run Your Engine Cooler Over All Which Helps In Performance & Mileage Through Time & As The Engine Runs For Longer Periods Of Time While Driving. These Air Injection Pipe Bolts Are Located On Both Sides Of The Engine. Each Air Injection Manifold Pipe Has 3-Air Injection Manifold Bolts Mounted Through The Holes That Attach To The Driver & Passenger Side Exhaust Manifolds. These OE Air Injection Pipe Hollow Bolts Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chief & The Jeep J-10 & J-20 Pick-Up Trucks From 1972-1991 WITH THE V8-360 ENGINE ONLY. THESE WILL NOT FIT THE 4.2 LITER AS THEY ARE A DIFFERENT SIZE. WE HIGHLY RECOMMEND YOU CHANGE THE AIR INJECTION PIPE HOLLOW BOLT AT THE SAME TIME WHICH WE ALSO HAVE ON THIS PAGE OF THE WEB SITE AS THIS IS ON THE DRIVER SIDE OF THE MANIFOLD PIPE AS WELL. PURCHASE THESE AS EACH OR A SET OF 3-BOLTS & YOU CAN SAVE MORE MONEY BY PURCHASING A COMPLETE SET OF 6-BOLTS. OE PART#J3229425 ---TEMP OUT OF STOCK--- JEEP HAS THESE ON BACK ORDER ---NO DATE AVAILABLE YET.-- |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Injection Pipe Hollow Bolt OEM GW 1972-1991 This Is A Factory Original Very Specifically Designed Hollow Bolt That Allows Air To Be Pumped Through From The Air Pump Then Through Your Air Divertor Valve Which Then Lets This Air Pass Through This Bolt & Then Into The Driver Side Air Injection Pipe Into The Exhaust Manifold To Cool It Down & Keep Your HC Emissions Lower To Help Your Engine Run More Efficient & Perform Better. This OE Special Hardened Air Injection Pipe Bolt Is The Longer & The Unique Bolt Of The 7-Air Injection Pipe Hollow Bolts. This Specific Special Air Injection Pipe Hollow Bolt Is Correct & Will Fit All Jeep Grand Wagoneer & Full Size Wagoneers & Cherokees Including Cherokee Chiefs & Jeep J-10 & J-20 Pick-Up Trucks From 1972-1991 With The V8-360 Engine. You Will Only Need 1-Of These Specific Air Injection Hollow Bolts. This One Is Located On The Center Hole Of The Driver Side Air Injection Manifold Pipe Hole. We Highly Recommend That You Purchase Or Check The Other 6-Air Injection Manifold Bolts We Also Sell On This Page & Web Site OE PART#J3229425 At The Same Time Especially If You Are Replacing The Air Injection Manifold Pipes. THIS PART HAS BEEN DISCONTINUED FROM JEEP & IS LIMITED. IF YOU NEED THIS BOLT-GET THIS WHILE IT IS AVAILABLE. WE ARE STILL SELLING THIS PART UNDER THE FACTORY LIST PRICE AS WE HAVE A FEW DOZEN AVAILABLE ON HAND. OE PART#J4007222 |
|
|
|
||||
|
|
|
|
Air Injection Pump Emission Vacuum Connector Tee V8-360 GW 1974-1991 This Is A Direct Replacement OE Style Better Design Than The Factory Original Emission Air Injection Manifold Pump Vacuum Hose Connector Tee. This Direct Fit High Density Plastic Vacuum Connector Tee Attaches The Air Injection Pump Hose That Comes From The Air Control Divertor Valve & Then Allows The Air To Flow To Each Check Valve At The Top Of The Air Injection Manifold Pipes. This Emissions Vacuum Tee Is The Correct Size & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chief & All Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 Engines From 1974-1991. If The Air Pump Stops Working Or The Air Control Divertor Valve Burns Out At One Time Or Another-This Vacuum Tee Sometimes Melts With The Hoses As Well Or Sometimes Over Time This Emissions Vacuum Tee May Crack & Lose Air Causing An Enormous Hissing Noise In The Engine Compartment & Not Allowing Your Air Injection Manifold Pipes To Do The Jon In Cooling The Cylinders & Keeping Your Engine From Emitting Higher Emissions. This Would Be The Time To Replace This Inexpensive Emissions Vacuum Tee. The Smaller Hoses Are No Loners Available But We Also Sell A High Temperature Silicone Replacement Emission Hose In The Proper Length To Be Cut To Size For The Use Of This Vacuum Tee. Just Check This Section Of The Web Site For Details. OE REPLACEMENT VAC TEE#33001752 |
|
|
|
||||
|
|
Click here for larger image
|
|
Air Pump Hose Clamps These are factory replacement hose clamps for the air pump hoses.These will come in a set of 2. This will fit all Jeep Grand Wagoneers with V8-360 engines from 1980-1991. |
|
|
|
||||
|
|
Click here for larger image
|
|
Air/Smog Pump Belt GW V8-360/401 1976-1991 This Is A Premium Brand Direct Replacement Better Than The OE Original Style Belts That Is Made To Fit Your V8 Engine Full Size Jeep Smog Pump Or Otherwise Called By Jeep Air Pump. This Belt Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chief & The Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 & 401 Engine From 1976-1991. If Your Air Pump Belt Is Missing-We Recommend Replace It Especially In A Emission Required State Before Taking The Test So You Can See If The Air Pump Itself Is Actually Working. This Particular Engine Seems To Work Better & Run Cooler With The Air Pump Running As It Pumps Cooler Air Through Your Exhaust Manifold By Pumping Air Through A Divertor Valve That Lets The Air Go To The Engine In 5-Different Areas Where Your Engine Needs To Not Only Cool Off-But Run Cleaner Air For The Environment. OE REPLACEMENT PART#J3228287 CROWN PART#JY013291 |
|
|
|
||||
|
|
Click here for larger image
|
|
Catalytic Converter GW 1974-1991 This is a Direct Fit Style Catalytic Converter. This Catalytic Convertor will fit all Jeep Grand Wagoneers & Full Size Wagoneers & J-10 & Cherokees & Jeep J-10 & J-20 Trucks from 1974-1991 With the V8-360 Engine. This Converter is Equipped with the Air Pipe Inlet For Emissions Purposes & For Attaching To The Converter UpStream Tube Which Helps Keep The Manifold Cooler & Engine Cooler When The Air Pump Is Pumping Cooler Air & Helping The Engine Run More Efficient. |
|
|
|
||||
|
|
|
|
Check Valve GW 1974-1991 These Are Air Injection Manifold Emission One-Way Check Valves. This Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & J-10 & J-20 Trucks & Full Size Cherokees & The Cherokee Chief With The V8-360 Engine From 1974-1991. Your Engine Is Equipped With 3 Of These Check Valves. One Check Valve By Each Air Injection Manifold Pipe & One By The Catalytic Converter Tube Pipe. You Can Order Each Check Valve As Needed. These Emission Check Valves Will Tend To Rust Completely Out Over Time Either Causing Loud Noises & Throwing Out High Emissions If You Are Lucky-Or Worse Yet-It Stops Doing What It Is Originally Designed To Do & Allow The Warm Air From The Catalytic Converter To Come Back The Other Way Instead Of Keeping The Cool Air Going One-Way-Thus The Name & Causing Some Expensive Damage By Melting All Of The Air Injection Manifold Hoses & Divertor Valve Which Is Quite Common If Not Replaced When Rusted & Worse Can Even Start An Engine Fire. These Check Valves Especially By The Cat Converter Should Not Be Taken Lightly When They Go Bad.We Will Sell These One-Way Check Valves As Each. SAVE MONEY & GET ALL 3 CHECK VALVES AT ONE TIME. OE REPLACEMENT PART#J3233960 |
|
|
|
||||
|
|
|
|
Convertor Downstream Air Tube Kit GW 1974-1991 This is a stainless steel catalytic convertor downstream air tube complete kit.This kit attatches to the catalytic convertor air pipe attatchment and goes all the way up in the engine compartment so that one of the check valves attatches to the air pump hose making the exhaust run cooler and cleaner for emissions.This will replace your rotted noisey downstream tube. This will fit all Jeep Grand Wagoneers and Full Size Wagoneers and Cherokees as well as J-10 Trucks from 1974-1991 with the V8-360 engine. This stainless steel tube is flexible for easier installation and yet strong enough to not rust again. This can be cut to a smaller size if you install it tighter and comes with the proper clamps to keep it from leaking any exhaust fumes.This will be sold with or with out the check valve attatched. |
|
|
|
||||
|
|
|
|
Featured Item: Dual Function CTO Switch 4.2 Liter GW 1981-1990 This Is A OE Style Direct Fit Dual Function Switch Made Specifically For The 4.2 Liter AMC Engine. This Black CTO Dual Function Switch Was Like The Factory Color Has 5-Specific Ports That Help The Temperature Override When Needed For The Engine To Warm Up As Necessary For Proper Engine Performance. This CTO Switch Will Fit All Jeep Grand Wagoneers & Jeep J-10 & J-20 Pick-Up Trucks & Full Size Wagoneers & Cherokees From 1981-1990 With The 4.2 Liter Engine. When This Switch Goes Bad It Will Leak Vacuum & Cease To Function Properly Causing A Rough Idle & Poor Fuel Economy & Drive-ability Problems.Some Places Call These Thermostatic Switches But Jeep Calls Them CTO Switches For COOLANT OVERRIDE SWITCH. THIS SWITCH WAS DISCONTINUED FROM JEEP SO WE WERE ABLE TO GET A FEW FROM THE SAME MANUFACTURER ALTHOUGH THEY DO NOT HAVE TO MANY LEFT. OE REPLACEMENT PART#J3238932 |
|
|
|
||||
|
|
|
|
Dual Function CTO Switch GW 1984-1991 This Is A OE Style Direct Fit Dual Function CTO Emission Vacuum Switch.This Dual Function CTO Switch Has 5-Vacuum Ports & Is Essential To Your Engines Proper Performance. Over Time This Switch Will Tend To Leak Vacuum Or Cease To Function Properly Causing A Rough Idle & Poor Fuel Economy & Drive-Ability Problems Causing A Rough Idle.This Dual Function CTO Switch Will Fit All Jeep Grand Wagoneers & Jeep J-10 & J-20 Pick-Up Trucks From 1984-1991 With a V8-360 Engine. This CTO Switch Is Mounted On The Rear Of The Intake Manifold. THIS REPLACEMENT SWITCH IS BLACK UNLIKE THE ORIGINAL WHITE 5-PORT SWITCH BUT WORKS EXACTLY THE SAME.JEEP REPLACED THE WHITE SWITCH WITH THE SAME BLACK SWITCH ONCE THEY RAN OUT OF THE WHITE ONES IN THE LATER YEARS AS WELL.THIS PART IS MADE FROM THE SAME MANUFACTURER THAT MADE THE JEEP SWITCHES BUT THESE ARE ALSO RUNNING LOW.JEEP LONG DISCONTINUED THIS PART SO THEY ARE NO LONGER AVAILABLE THROUGH JEEP. OE REPLACEMENT PART#33001669 |
|
|
|
||||
|
|
|
|
E.G.R. Valve GW 1983-1989 This Is A Direct Replacement OE Style E.G.R. Valve Is Made For & Sold By Omix. If You Are Having Problems With Your Engine Hesitating On Acceleration That Causes A Backfire Which Is Not Fuel Related-This May Be The Cause. The E.G.R. Valve May Get Seized When It Gets Old When Carbon Builds Up Causing It To Backfire Or Your Engine To Lose Power & Emmit Higher Carbons For Higher Emissions. This E.G.R Valve Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Jeep J-10 & J-20 Pick-Up Trucks From 1983-1989 With The V8-360 Engine & We Also Have The EGR Valve For The 4.2 Liter Engine From 1983-1989. The E.G.R Valve Comes With A Gasket. OMIX Gives A Limited 3-Year Warranty On This EGR Valve For Any Material Defects. V8-EGR VALVE OMIX PART #17712.02 4.2 LITER EGR VALVE OE REPLACEMENT PART#33000889 17712.01 |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: Edelbrock Intake Manifold Bolt Set V8-360-401 GW 1974-1991 This Is A Edelbrock Intake Manifold 8- Hex Head Bolt Set Made Specifically For The V8-360 & 401 Engine. This Edelbrock Intake Manifold Bolt Set Is Made Of Steel Cadmium & Comes With A Hex Head Design. This Edelbrock Intake Manifold Bolt Set Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees Including The Cherokee Chiefs & The Jeep J-10 & J-20 Pick-Up Trucks With The V8-360 & 401 Engines From 1974-1991.Anytime You Replace An Intake Manifold Or You Want To Change The Gasket Set-These Bolts Should Be Replaced. THESE ARE ONLY SOLD AS A COMPLETE SET. EDELBROCK PART#8534 |
|
|
|
||||
|
Pages: 1 2 [>>] | ||||