Featured Jeep CJ and Jeep Wrangler Parts

	Browse through our selection of Jeep CJ and Jeep Wrangler parts. If you need a part but don't see it here, e-mail us at parts@teamwrangler.com and we'll do our best to locate it for you. Or if you prefer, call us at (262) 658-2268. Order safely and securely: Clicking on the purchase button for any of the parts below will take you to our secure online ordering system. All prices below are quoted in U.S. dollars. Shipping charges are additional. 30-day warranty on parts: Parts must be returned in original package and are subject to a 20% restocking fee. No returns on electrical items. Customer must pay for return shipping.
	Click here for larger image		Featured Item: FRONT SPINDLE BEARING KIT CJ 1977-1986 This OMIX Brand Direct Fit OE Style Bearing Kit That Goes On The Front Spindle Is Specifically Designed For A Jeep CJ's From 1977-1986. Omix Builds Direct OE Replacement Jeep Parts & Accessories To The Manufacturer’s Original Specifications Allowing Them To Give A 3-Year Limited Warranty For Defects Only On All Their OE Replacement Jeep Parts Such As This Front Spindle Bearing Kit. One Kit Is Needed For Each Side. If Your Front Wheel Bearings Are Grinding While Driving Or You Hear A Whining Noise At Highway Speeds-This May Be The Problem. PURCHASE THESE AS EACH OR SAVE MONEY WHEN PURCHASING THESE AS A PAIR TO GET A COMPLETE SET.THIS SET IS INCLUDED IN THE FRONT HUB BEARING ASSEMBLY KIT ALREADY. NEW LOWER PRICES ON THIS KIT!! OE REPLACEMENT PART#J8127356 OMIX PART#16529.04 Featured Price: $9.95 77-86 FT SPINDLE BEARING KIT#16529.04 - $9.95PAIR SPINDLE BEARING KITS#16529.04 - $18.00 Quantity :
	Click here for larger image		Featured Item: Mega Slip Yoke Eliminator Output Shaft Oil Seal Wrangler 1987-2006 Service oil seal for the Rugged Ridge Mega Short Slip Yoke Eliminator Wrangler 87-06 Kit PN: 18676.72, seal # 18676.75 Featured Price: $5.95 Quantity :
	Click here for larger image		Featured Item: Official MOPAR Licensed Jeep ® CJ-8 Emblem 1981-1986 A Jeep® just isn’t a Jeep® unless it bears the name. This CJ-8 Emblem Was Designed Specifically By OMIX-ADA To Match The OE CJ-8 Emblem & Will Fit The Of All CJ-8 Tailgates From 1981-1986. These emblems were mounted on the Driver Rear Tailgates & can be mounted elsewhere if you want extra ones to show your Jeep enthusiasm such as the dash of your CJ-8 or Tool box. This CJ-8 Emblem Was Often Missing or Discolored. Now you can put the CJ8 Name back where it belongs with This Exact Reproduction From Omix-Ada®. This badge comes with pre-applied double sided adhesive tape for a quick and easy installation. Exclusive Omix-Ada® Tooling! Officially Licensed MOPAR Product. THE OE ORIGINAL PART# WAS# J5758601---WHEN THEY WERE EVEN AVAILABLE. OMIX PART#DMC-5758601 Featured Price: $16.95 81-86 LICENSED CJ-8 EMBLEM#DMC-5758601 - $16.95 Quantity :
	Click here for larger image		Featured Item: Outer Wipe Set Wrangler 1997-2005 This is a Premium Set of Outer Door Belt Wipe Moldings. This 2 Piece Outer Door Wipe Set will fit the Jeep Wranglers with Full Doors from 1997-2005. These Belt Moldings help keep debris from coming inside the door when opening & closing the windows. These tend to dry up after time. They are easy to remove & install. We also sell tools to remove if you think tat it would be easier. This only comes as the 2-Piece Set. Featured Price: $39.95 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub Jeep CJ3B 1953-1964 Steel body tub replacement for Jeep CJ3B from 1953-1964. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. Featured Price: $2500.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub Jeep CJ5 1955-1983 Replacement steel body tub for all CJ5’s from 1955-1986. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. Please select your vehicle year below. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. Featured Price: $3000.00 CJ5 1955-1969 - $3,000.00CJ5 1970-1971 - $3,000.00CJ5 1972-1975 - $3,000.00CJ5 1976-1983 - $2,800.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub Jeep CJ6 1955-1971 Replacement steel body tub for your Jeep CJ6 from 1955-1971. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. Please select your vehicle year below. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. OMIX PART#12002.12 Featured Price: $3400.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub Jeep CJ7 1976-1986 Replacement steel body tub for your Jeep CJ7 from 1976-1986. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. OMIX PART # 12002.14 Featured Price: $2800.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub Jeep CJ8 Scrambler 1981-1986 Replacement steel body tub for your Jeep CJ8 Scrambler from 1981-1986. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. OMIX PART # 12002.15 Featured Price: $3700.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub W/ Jeep Script CJ5 1955-1983 MOPAR LICENSED PRODUCT MOPAR Officially Licensed steel body tub for your Jeep CJ5 from 1955-1983. JEEP logo stamped in Cowl Side. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. Please select your vehicle year below. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. OMIX PART# DMC-680637 Featured Price: $3200.00 CJ5 1955-1969 - $3,200.00CJ5 1970-1971 - $3,200.00CJ5 1972-1975 - $3,200.00CJ5 1976-1983 - $3,200.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub W/ Jeep Script CJ7 1976-1986 MOPAR LICENSED PRODUCT MOPAR Officially Licensed steel body tub for your Jeep CJ7 from 1976-1986. JEEP logo stamped in Cowl Side. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. OMIX PART # DMC-5464362 Featured Price: $3300.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub WILLYS CJ2A 1946-1949 Steel body tub replacement for WILLYS CJ2A Jeeps from 1946-1949. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. OMIX PART # 12002.06 Featured Price: $2500.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub WILLYS CJ3A 1948-1953 Steel body tub replacement for WILLYS CJ3A from 1948-1953. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. Please Note: Body Tub does not include windshield, hood, or fenders. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. Featured Price: $2500.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub WILLYS MB 1941-1942 This steel body tub will only fit WILLYS MB Jeeps from 1941-1942 manufactured until March 1, 1942. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. OMIX PART# 12002.02 Featured Price: $1900.00 Quantity :
	Click here for larger image		Featured Item: Steel Body Tub WILLYS MB 1942-1945 This steel body tub will only fit WILLYS MB Jeeps from 1942-1945 manufactured after March 1, 1942. The Body Tub is a completely assembled body shell from the firewall to the tail light panel. Fitted, welded and assembled together with the cowl panel, rear wheel housings, dash panel, and glove box already in place. All Omix-Ada body tubs are manufactured using 16 gauge steel for all side and tail panels. In most cases it is thicker than original. All of the front and rear flooring, mounting brackets, top cowl assembly and wheel housing are constructed from 18 Gauge steel to guarantee a durable and long lasting product. These pieces are constructed using a 7 step metal preparation process including: A 5 bath dip to totally eliminate rust, dirt and grease; A phosphate and acid rinse step to ensure corrosion resistance and proper adhesion of the primer; and New primer formula and application method that is designed for a smooth and even finish. Body tubs include all major factory mounting locations, including channels for body mounting, and dashes and shifter tunnels have been left blank in some applications with varied OE locations. No more grinding, welding, or cutting out rusty panels, just to struggle as you fight to line up the new part. All the hard work is done for you. These pieces come primed and almost completely read for paint. Some fitting and working may be required to get that perfect fit. It is the ultimate restoration accessory shipped directly to your door. THE SHIPPING AMOUNT THAT IS SHOWN ON YOUR BILL WILL BE REMOVED BEFORE YOUR RECEIVE YOUR ORDER. OMIX PART #12002.01 Featured Price: $1900.00 Quantity :
	Click here for larger image		Featured Item: Windshield Wrangler 1987-2006 These are Premium Replacement Style Windshields. These are Tinted Like The Factory Windshields and Will Fit all Jeep Wranglers From 1987-2006. Please Specify Which Year Style Windshield You Would Like. They Do Not Come With Any Gaskets--They Only Come Glass Alone. Featured Price: $99.95 1987-1995 WRANGLER WINDSHIELD - $99.951997-2006 WRANGLER WINDSHIELD - $99.95 Quantity :